subscribe this

http://labs.google.co.in/smschannels/subscribe/sreedharmadisetty

Hi friends One important Notice.,.,.,Let me Share

http://labs.google.co.in/smschannels/subscribe/sreedharmadisetty
Here Those people who required Placement .,in the session 2011-12..for M.Techs they are preparing Data base of our marks and extra things.,.,.,.,

So Who are intrested they might have to go to the Placement cell.,.,
However,collect their forms.,.,and fill it with required information,.,.,


After that you need to submit your two passport size photo graphs,.,10th marks list,12th marks listm.,.,B.tech 8Th sem.,.marks list for proof of cgpa.,.,And If u Have any extra curricular activities,.,.,you also need to submit there.,..

If possible do tomoro it self ,.,I will also Do tomoro.,.,.,

ALL THE BEST FOR YOUR FUTURE,.,.,

Cordially,.,M.SREEDHAR

POWERELCTRONICS2ND

EXPEIMENT1:DETERMINE THE TRANSFER FUNCTION FOR SERVO MOTOR.

EXPERINET2:DETERMINE THE TRANSFER FUNCTION OF DC-MOTOR.

EXPERIMENT3:SPEED CONTROL I.M BY USING PWM INVERTER.

EXPRIMENT4:SPEED CONTROL OF SEPARATELY EXICTED MOTOR BY USING FULL WAVE RECTIFIER.

EXPERIMNET5: SPEED CONTROL OF SEPARATELY EXICTED MOTOR BY USING DUAL CONVERTER.

EXPERIMNT6:SPEED CONTROL OF S.E MOTOR ON ELECTRICAL LOAD BY ARMATURE VOLTAGE CONDITION METHOD .......

కొన్ని మొకయ మైన సైట్ lu

1960-1979 Publications

1967 1968 1969 1970 1971 1972

1973 1974 1975 1976 1977 1978 1979

1967 Publications

1. Lipo, T.A., P.C. Krause, “Stability Analysis of a Reluctance-Synchronous Machine,” IEEE Transactions on Power Apparatus and Systems, Aug. 1967, vol. PAS-86, pp. 825-834.

top

1968 Publications

1. Lipo, T.A., P.C. Krause, “Stability Analysis for Variable Frequency Operation of Synchronous Machines,” IEEE Transactions on Power Apparatus and Systems, Jan. 1968, vol. PAS-87, no. l, pp. 227-234.

top

1969 Publications

1. Lipo, T.A., P.C. Krause, “Stability Analysis of a Rectifier-Inverter Induction Motor Drive,” IEEE Transactions on Power Apparatus and Systems, Jan. 1969, vol. PAS-88, no. l, pp. 55-66.

2. Lipo, T.A., P.C. Krause, H.E. Jordan, “Harmonic Torque and Speed Pulsations in a Rectifier-Inverter Induction Motor Drive,” IEEE Transactions on Power Apparatus and Systems, May 1969, vol. PAS-88, no. 5, pp. 579-587.

3. Krause, P.C., T.A. Lipo, “Analysis and Simplified Representations of a Rectifier-Inverter Induction Motor Drive,” IEEE Transactions on Power Apparatus and Systems, May 1969, vol. PAS-88, no. 5, pp. 588-596.

4. Krause, P.C., T.A. Lipo, “Analysis and Simplified Representations of Rectifier-Inverter Reluctance-Synchronous Motor Drives,” IEEE Transactions on Power Apparatus and Systems, June 1969, vol. PAS-88, no. 6, pp. 962-970.

5. Nelson, R.H., T.A. Lipo, P.C. Krause, “Stability Analysis of a Symmetrical Induction Machine,” IEEE Transactions on Power Apparatus and Systems, Nov. 1969, vol. PAS-88, no. 11, pp. 1710-1717.

6. Lipo, T.A., “Analog Computer Simulation of a Three-Phase Full-Wave Controlled Rectifier Bridge,” Proceedings of IEEE, Dec. 1969, vol. 57, no. 12, pp. 2137-2146.

top

1970 Publications

1. Chattopadhyay A.K., T.A. Lipo, J. Hindmarsh, “Performance and Analysis of Thyristor Commutator Motor,” Conference Record of Electrical Machines in the Seventies, Dundee, Scotland, July 1-3, 1970.

top

1971 Publications

1. Lipo, T.A., “Multiple Reference Frames Applied to Impedance Unbalances of Induction Machinery-The Open Circuited Stator Phase,” IEEE Conference on Systems, Networks and Computers Conference Record, Ocztepec, Mexico, Jan. 21-23, 1971, pp. 312-316.

2. Lipo, T.A., “The Analysis of Induction Motors with Voltage Control by Symmetrically Triggered Thyristors,” IEEE Transactions on Power Apparatus and Systems, Mar.-Apr. 1971, vol. PAS-90, no. 2, pp. 515-525.

top

1972 Publications

1. Mayer, C.B., T.A. Lipo, “The Use of Simulation in the Design of an Inverter Drive,” IEEE-IAS Annual Meeting Conference Record, 1972, pp. 745-752.

top

1973 Publications

1. Consoli, A., T.A. Lipo, “Modelling and Simulation of Induction Motors with Saturable Leakage Reactance,” IEEE Transactions on Industry Applications, Jan.-Feb. 1984, vol. 20, no. 1, pp. 180-189.

top

1974 Publications

1. Wolfinger, J.F., T.A. Lipo, “Stability Improvement of Inverter Driven Induction Motors by Use of Feedback,” IFAC Symposium on Control in Power Electronics and Electrical Drives, Conference Record, Oct. 7-9, 1974, pp. 237-251.

2. T.A. Lipo, A.B. Plunkett, “A Novel Approach to Induction Motor Transfer Functions,” IEEE Transactions on Power Apparatus and Systems, Sept.-Oct. 1974, vol. PAS-93, no. 5, pp. 1410-1418.

3. Kruase, P.C., D.P. Carroll, T.A. Lipo, “Applications of Analog and Hybrid Computation in Electric Power System Analysis,” Proceedings of IEEE, 1974, pp. 994-1009.

top

1975 Publications

1. Ong, C.M., T.A. Lipo, “Stability Behavior of a Synchronous-Reluctance Machine Supplied from a Current Source Inverter,” 1975 IEEE-IAS Annual Meeting Conference Record, 1975, pp. 484-493.

2. Ong, C.M., T.A. Lipo, “An Approach to Closed Loop Design of a Current Source Inverter/Reluctance Motor Drive,” 1975 IEEE-IAS Annual Meeting Conference Record, 1975, pp. 494-500.

3. Lipo, T.A., F.G. Turnbull, “Analysis and Comparison of Two Types of Square-Wave Inverter Drives,” IEEE Transactions on Industry Application, Mar.-Apr. 1975, vol. IA-11, no. 2, p. 137-147.

4. Lipo, T.A., E.P. Cornell, “State-Variable Steady-State Analysis of a Controlled Current Induction Motor Drive,” IEEE Transactions on Industry Applications, Nov.-Dec.1975, vol. IA-11, no. 6, pp. 704-712.

5. Lipo, T.A., E.P. Cornell, “Modeling and Design of Controlled Current Induction Motor Drive Systems,” IEEE-IAS Annual Meeting, Sept. 28–Oct. 2, 1975, pp. 612-620.

top

1976 Publications

1. Plunkett, A.B., T.A. Lipo, “New Methods of Induction Motor Torque Regulation,” IEEE Transactions on Industry Applications, Jan.-Feb. 1976, vol. IA-12, no. 1, pp. 47-55.

top

1977 Publications

1. Cornell, E.P., T.A. Lipo, “Modeling and Design of Controlled Current Induction Motor Drive Systems,” IEEE Transactions on Industry Applications, July-Aug. 1977, vol. IA-13, no. 4, pp. 321-330.

2. Ong, C.M., T.A. Lipo, “Steady-State Analysis of a Current Source Inverter-Reluctance Motor Drive, Part I Analysis,” IEEE Transactions on Power Apparatus and Systems, July-Aug. 1977, vol. PAS-96, no. 4, pp. 1145-1151.

3. Ong, C.M., T.A. Lipo, “Steady-State Analysis of a Current Source Inverter-Reluctance Motor Drive, Part II Experimental and Analytical Results,” IEEE Transactions on Power Apparatus and Systems, July-Aug. 1977, vol. PAS-96, no. 4, pp. 1152-1155.

4. Kerkman, R.J., P.C. Krause, T.A. Lipo, “Simulation of a Synchronous Machine with an Open Phase,” Electric Machines and Electromechanics, Apr.-June 1997, vol. 1, no. 3, pp. 245-254.

5. Kalsi, S.S., T.A. Lipo, “A Modal Approach to the Transient Analysis of Synchronous Machines,” Electric Machines and Electromechanics, July-Sept. 1977, vol. 1, no. 4, pp. 337-354.

6. Lipo, T.A., “Flux Sensing and Control of Static AC Drives by the Use of Flux Coils,” IEEE Transactions on Magnetics, Sept. 1977, vol. MAG-13, no. 5, pp. 1403-1408.

7. Plunkett, A.B., J.D. D’Atre, T.A. Lipo, “Synchronous Control of a Static AC Induction Motor Drive,” IEEE-IAS Annual Meeting, Los Angeles, CA, Oct. 2-6,1977.

8. A.B. Plunkett, T.A. Lipo, “Source Impedance Effects in the Control of Inverter-Induction Motor Drives,” (no apparent publisher) 1977

top

1978 Publications

1. Muljadi, E., T.A. Lipo, D.W. Novotny, “Power Factor Enhancement of Induction Machines by Solid State Excitation,” IEEE Transactions on Power Electronics, Oct. 1989, vol. 4, no. 4, pp. 409-418.

top

1979 Publications

1. Lipo, T.A., “Performance Calculations of a Reluctance Motor Drive by dq Harmonic Balance,” IEEE Transactions on Industry Applications, Jan.-Feb 1979, vol. IA-15, pp. 25-35.

2. Lipo, T.A., T.A. Nondahl, “Pole-by-Pole d-q Model of a Linear Induction Machine,” IEEE Transactions on Power Apparatus and Systems, Mar.-Apr. 1979, vol. PAS-98, no. 2, pp. 629-642.

3. Lipo, T.A., “Analysis and Control of Torque Pulsations in Current Fed Induction Motor Drives,” Electric Machines and Electromechanics, Apr.-June 1979, vol. 3, pp. 357-368.

4. Nondahl, T.A., T.A. Lipo, “Transient Analysis of a Linear Induction Machine Using the d-q Pole-by-Pole Model,” IEEE Transactions on Power Apparatus and Systems, July-Aug. 1979, vol. PAS-98, no. 4, pp. 1366-1374.

5. Lipo, T.A., “Simulation of a Current Source Inverter Drive,” IEEE Transactions on Industrial Electronics and Control Instrumentation, May 1979, vol. IECI-26, pp. 98-103.

6. Steigerwald, R.L., T.A. Lipo, “Analysis of a Novel Forced-Commutation Starting Scheme for a Load-Commutated Synchronous Motor Drive,” IEEE Transactions on Industry Applications, Jan.-Feb. 1979, vol. IA-15, pp. 14-24.

7. Plunkett, A.B., J. D. D'Atre, T.A. Lipo, “Synchronous Control of a Static AC Induction Motor Drive,” IEEE Transactions Industry Applications, July-Aug. 1979, vol. IA-15, no. 4, pp. 430-437.

8. Bose, B.K., T.A. Lipo, “Control and Simulation of a Current-Fed Linear Inductor Machine,” IEEE Transactions on Industry Applications, Nov.-Dec. 1979, vol. IA-15, no. 6, pp. 591-600.

1980-1989 Publications

1980 1981 1982 1983 1984

1985 1986 1987 1988 1989

1980 Publications

1. Kerkman, R.J., T.A. Lipo, W. G. Newman, J. E. Thirkell, “An Inquiry into Adjustable Speed Operation of a Pumped Hydro Plant, Part I -Machine Design and Performance,” IEEE Transactions on Power Apparatus and Systems, Nov.-Dec. 1980, vol. PAS-99, no. 5, pp. 1828-1837.

2. Kerkman, R.J., T.A. Lipo, W. G. Newman, J. E. Thirkell, “An Inquiry into Adjustable Speed Operation of a Pumped Hydro Plant, Part II - System Analysis,” IEEE Transactions on Power Apparatus and Systems, Nov.-Dec. 1980, vol. PAS-99, no. 5, pp. 1838-1844.

3. Lipo, T.A, “A d-q Model for Induction Machines,” International Conference on Electrical Machines, Sept. 15-17, 1980, Athens, Greece, pp. 860-867.

top

1981 Publications

1. Consoli, A., T.A. Lipo, “Modelling and Simulation of Induction Motors with Saturable Leakage Reactance,” IEEE IAS Annual Meeting, Philadelphia, PA, Oct. 5-9, 1981, pp.527-35. (see 1984-1).

2. Lipo, T.A., “Analog and Hybrid Computer Simulation of Static Power Conversion Systems,” U.S.-Japan Cooperative Seminar on Analysis and Design in Power Electronics, Kobe, Japan, Nov. 25-28, 1981, pp.55-66.

3. Novotny, D.W., T.A. Lipo, “Induction Machine Efficiency Improvement by Means of Voltage Control,” U.S.-Japan Cooperative Seminar on Analysis and Design in Power Electronics, Kobe, Japan, Nov. 25-28, 1981, pp.199-206.

4. Owen E.L., H. D. Snively, T.A. Lipo, “Torsional Coordination of High Speed Synchronous Motors- Part II,” IEEE Transactions on Industry Applications, Nov.-Dec. 1981, vol. IA-17, pp. 572-580.

top

1982 Publications

1. Consoli, A., T.A. Lipo, “Orthogonal Axis Models for Asymmetrically Connected Induction Machines,” IEEE Transactions on Power Apparatus & Systems, Dec. 1982, vol. PAS-101, no. 12, pp. 4518-4528.

2. Lipo, T.A., F.X. Wang, “Design and Performance of a Converter Optimized AC Machine,” IEEE IAS Annual Meeting, New York, NY, 1982, vol.1405, pp. 491-499.

3. Lipo, T.A, L.H. Walker, “Design and Control Techniques for Extending High Frequency Operation of a CSI Induction Motor Drive,” IEEE-IAS Annual Meeting, New York, NY,1982, vol. 1405 pp. 698-706. (see 1983-3).

top

1983 Publications

1. Lipo, T.A., “Hybrid Computer Simulation of ASCI Current Source Inverter,” Electric Machines & Power Systems, Jan.-Feb. 1983, vol. 8, no. 1, pp. 1-15.

2. Rowan, T.M., T.A. Lipo, “A Quantitative Analysis of Induction Motor Performance Improvement by SCR Voltage Control,” IEEE Transactions on Industry Applications, July-Aug. 1983, vol. IA-19, no. 4, pp. 545-553.

3. Lipo, T.A, L.H. Walker, “Design and Control Techniques for Extending High Frequency Operation of a CSI Induction Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct 1983, vol. IA-19, no. 5, pp. 744-753.

4. Wang, F.X, T.A. Lipo, “Analysis and Steady State Behavior of an Optimized AC Converter Machine,” IEEE Transactions on Industry Applications, Aug 1983, vol. PAS-102, no. 8, pp 2734-2742.

5. He, Y.K., T.A. Lipo, “Saturation Effects in the Stability Analysis of a VSI Induction Motor Drive,” IPEC Tokyo, 1983, vol. 1, pp. 181-192.

6. Lipo, T.A., L.H. Walker, “Design and Control Techniques for Extending High Frequency Operation of a CSI Induction Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct. 1983, vol. IA-19, pp. 744-753.

7. He, Y.K., T.A. Lipo, “Saturation Effects in the Stability Analysis of a VSI Induction Motor Drive,” Transactions of Electrical Engineers (Japan), Nov.-Dec. 1983, vol. 103, no. 11/12, pp. 117-124.

top

1984 Publications

1. Consoli, A., T.A. Lipo, “Modelling and Simulation of Induction Motors with Saturable Leakage Reactance,” IEEE Transactions on Industry Applications, Jan.-Feb. 1984, vol. 20, no. 1, pp. 180-189.

2. Lipo, T.A., F.X. Wang, “Design and Performance of a Converter Optimized AC Machine,” IEEE Transactions on Industry Applications, July-Aug. 1984, vol. 20, no. 4, pp. 834-844. (see 1982-2).

3. He, Y.K, T.A. Lipo, “Computer Simulation of an Induction Machine with Spatially Dependent Saturation,” IEEE Transactions on Power Apparatus and Systems, Apr. 1984, vol. 103, no. 4, pp. 707-714.

4. Lipo, T.A, “A Cartesian Vector Approach to Reference Frame Theory of AC Machines,” International Conference on Electrical Machines, Sept. 18-21, 1984, vol. 1, pp. 239-242.

5. Lipo, T.A, “Variable Speed Generator Technology Options for Wind Turbine Generators,” DOE/NASA Workshop on HAWT Technology, May 8-10, 1984.

6. Colby, R.S., T.A. Lipo, D.W. Novotny, “A State Space Analysis of LCI Fed Synchronous Motor Drives in the Steady State,” IEEE-IAS Conference Record, 1984, pp. 439-444.

7. Matsuo, T., T.A. Lipo, “A Rotor Parameter Identification Scheme for Vector Controlled Induction Motor Drives,” IEEE-IAS Conference Record, 1984, pp. 538-545. (see 1985-2).

8. Kirschen, D.S., D.W. Novotny, T.A. Lipo, “On-line Efficiency Optimization of a Variable Frequency Induction Motor Drive,” IEEE-IAS Conference Record, 1984, pp. 488-493. (see 1985-3).

9. Matsuo, T., T.A. Lipo, “Hybrid Computer Simulation of a Field Oriented Induction Motor Drive,” Fifth Brazilian/First Latin American Conference on Automatic Control, Sept. 3-6, 1984.

top

1985 Publications

1. Colby, R.S., T.A. Lipo, D.W. Novotny, “A State Space Analysis of LCI Fed Synchronous Motor Drives in the Steady State,” IEEE Transactions on Industry Applications, July-Aug. 1985, vol. 21, no. 4, pp. 1016-1022.

2. Matsuo, T., T.A. Lipo, “A Rotor Parameter Identification Scheme for Vector Controlled Induction Motor Drives,” IEEE Transactions on Industry Applications, May-June 1985, vol. 21, no. 4, pp. 624-632.

3. Kirschen, D.S., D.W. Novotny, T.A. Lipo, “On-line Efficiency Optimization of a Variable Frequency Induction Motor Drive,” IEEE Transactions on Industry Applications, May-June 1985, vol. 21, no. 3, pp. 610-616.

4. Muljadi, E., R. Schiferl, T.A. Lipo, “Induction Machine Phase Balancing by Unsymmetrical Thyristor Voltage Control,” IEEE Transactions on Industry Applications, May/June 1985. Vol. 21. No. 3. pp. 669-679.

5. Creer, W.H., D.W. Novotny, T.A. Lipo, “Determination of Equivalent Circuits for Induction Machines with Skin Effect Using Terminal Characteristics,” Electric Machines & Power Systems, 1985, vol. 10, no. 5 & 6, pp. 379-394.

6. Sood, P.K., H. Rehaoulia, D.W. Novotny, T.A. Lipo, “A Pulse Width Controlled Three Switch Exciter for Induction Generators,” IEEE-IAS Conference Record, Oct. 6-11, 1985, pp. 653-661.

7. Deng, D., T.A. Lipo, “A Modified Control Method for Fast Response Current Source Inverter Drives,” IEEE-IAS Conference Record, 1985, pp. 662-671.

8. Matsuo T., T.A. Lipo, “Hybrid Computer Simulation of an Induction Motor Drive with Indirect Field Oriented Control,” CAMC Conference, Minneapolis MN, July 1985.

9. Sneyers, B., D. W. Novotny, T.A. Lipo, “Field Weakening in Buried Permanent Magnet AC Motor Drives,” IEEE Transactions on Industry Applications, Mar.-Apr. 1985, vol. IA-21, no. 2, 398-407.

top

1986 Publications

1. Deng, D., T.A. Lipo, “A Modified Control Method for Fast Response Current Source Inverter Drives,” IEEE Transactions on Industry Applications, July-Aug. 1986, vol. 22, no. 4, pp. 653-665. (see 1985-7).

2. Lipo, T.A., K.C. Chang, “A New Approach to Flux and Torque Sensing in Induction Machines,” IEEE Transactions on Industry Applications, July-Aug. 1986, vol. 22, no. 4, pp. 731-737.

3. Muljadi, E., T.A. Lipo, D.W. Novotny, “Power Factor Enhancement of Induction Machines by Solid State Excitation,” International Conference on Evolution and Modern Aspects of Induction Machines (ICEMAIM), July 8-11, 1986, pp. 424-430.

4. Benzi, F., D. Zinger, T.A. Lipo, “A New Approach to Induction Motor Torque and Speed Control,” Conference on Applied Motion Control (CAMC), June 10-12, 1986, pp. 25-29.

5. Lipo, T.A., M.E. Kramer, “Measurement of Induction Motor Torque Pulsations Due to Inverter Supply,” NATO Conference on Electrical Machines, Louvain, Belguim, Aug 1986. Vibrations & Audible Noise in Electrical Machines, Martinus Nijhoff, 1988, pp. 191-211.

6. Rowan, T.M., R.J. Kerkman, T.A. Lipo, “Operation of Naturally Sampled Current Regulators in the Transition Region,” IEEE-IAS Conference Record, 1986, vol. 1, pp. 91-98. (see 1987-2).

7. Wang, C.G., T.A. Lipo, D.W. Novotny, “An Automated Rotor Time Constant Measurement System for Indirect Field Oriented Drives,” IEEE-IAS Conference Record, 1986, vol. 1, pp. 140-146. (see 1988-2).

8. Sood, P.K., T.A. Lipo, “Power Conversion Distribution System Using a High Frequency AC Link,” IEEE-IAS Conference Record, 1986, vol. 1, pp. 533-541.

9. Carpenter, R. T.A. Lipo, “Electronic Adjustable Speed Drive Technology Synopsis,” APEC Conference Record, Dec. 3-4, 1986, pp. 10-?.

10. Law, J.D., T.A. Lipo, “A Single Phase Induction Motor Voltage Controller with Improved Performance,” IEEE Transactions on Power Electronics, Oct. 1986, vol. PE-1, no. 4, pp. 240-247.

top

1987 Publications

1. Kirschen, D.S., D.W. Novotny, T.A. Lipo, “Optimal Efficiency Control of an Induction Motor Drive,” IEEE-PES Transactions on Energy Conversion, Mar. 1987, vol. EC-2, no. 1, pp. 70-76.

2. Rowan, T.M., R.J. Kerkman, T.A. Lipo, “Operation of Naturally Sampled Current Regulators in the Transition Region,” IEEE Transactions on Industry Applications, July-Aug. 1987, vol. 23, no. 4, pp. 586-596.

3. Sood, P.K., T.A. Lipo, I.G. Hansen, “A Versatile Power Converter for High Frequency Link Systems,” APEC, 1987, pp. 249-256.

4. Xu, L.Y., T.A. Lipo, “A Novel Converter Fed Reluctance Motor with High Power Density,” Electric Energy Conference (EECON ), Oct. 6-9 1987, vol. 1, pp. 125-134. Symposium on Electric Drives, Naples, Italy, 1987, pp. 315-321.

5. Zai, L.C., T.A. Lipo, C.L. DeMarco, “An Extended Kalman Filter Approach to Rotor Time Constant Measurement in PWM Induction Motor Drives,” IEEE-IAS Conference Record, 1987, vol. 1, pp. 177-183.

6. Lipo, T.A, P.K. Sood, “Study of the Generator/Motor Operation of Induction Machines in a High Frequency Link Space Power System,” Prepared for NASA-Lewis Research Center.

7. Moreira, J.C., T.A. Lipo, “Simulation of a Four Phase Switched Reluctance Motor Including the Effects of Mutual Coupling,” Beijing International Conference on Electrical Machines (BICEM), Aug. 10-14, 1987, Book I, pp. P-21-P-27.

8. Lipo, T.A., “Recent Progress in the Development of Solid State AC Motor Drives,” Electric Energy Conference and Instrumentation (EECON ‘87), Oct. 6-9, 1987, vol. I, pp. 125-134.

9. Profumo, F., D. Zinger, T.A. Lipo, “Design of a Robust Controller for Direct Field Oriented Control of an Induction Motor,” Electric Drives Conference Record, Cagliari, Italy, Sept. 15-17 1987, pp. 137-143.

10. Lipo, T.A., “The Potential for High Temperature Superconducting AC and DC Motors,” Electric Machines and Power Systems, 1987, vol. 13, no. 6, pp. 373-385.

top

1988 Publications

1. Lipo, T.A., M.E. Kramer, “Measurement of Induction Motor Torque Pulsations Due to Inverter Supply,” Vibrations & Audible Noise in Electrical Machines, Martinus Nijhoff, 1988, pp. 191-211.

2. Wang, C.G., T.A. Lipo, D.W. Novotny, “An Automated Rotor Time Constant Measurement System for Indirect Field Oriented Drives,” IEEE Transactions on Industry Applications, Jan.-Feb. 1988, vol. 24, no. 1, pp. 151-159.

3. Sood, P.K., T.A. Lipo, “Power Conversion Distribution System Using a High Frequency AC Link,” IEEE Transactions on Industry Applications, Mar.-Apr. 1988, vol. 24, no. 2, pp. 288-300.

4. Sood, P.K., T.A. Lipo, I.G. Hansen, “A Versatile Power Converter for High Frequency Link Systems,” IEEE Transactions on Power Electronics, Oct. 1988, vol. 3, no. 4, pp. 383-390.

5. Lipo, T.A., “Recent Progress in the Development of Solid State AC Motor Drives,” IEEE Transactions on Power Electronics, Apr. 1988, vol. 3, no. 2, pp. 105-117.

6. Ojo, J.O., T.A. Lipo, “An Improved Model for Saturated Salient Pole Synchronous Motors,” IEEE-IAS Conference Record, 1988, vol. 1, pp. 222-230.

7. Sul, S.K., T.A. Lipo, “Field Oriented Control of an Induction Machine in a High Frequency Link Power System,” IEEE-PESC Conference Record, Apr. 11-14, 1988, vol. 2, pp. 1084-1090.

8. Zinger, D., F. Profumo, T.A. Lipo, D.W. Novotny, “A Direct Field Oriented Controller for Induction Motor Drives Using Tapped Stator Windings,” IEEE-PESC Conference Record, Apr. 11-14, 1988, vol. 2, pp. 855-861.

9. Sul, S.K., T.A. Lipo, “Design and Performance of a High Frequency Link Induction Motor Drive Operating at Unity Power Factor,” IEEE-IAS Conference Record, Oct. 2-7, 1998, Part 2, pp. 308-313.

10. Oyama, J., F. Profumo, E. Muljadi, T.A. Lipo, “A Digitally Based Voltage Controller for Correcting Induction Motor Phase Unbalance,” ICEM, Sept 12-14, 1988, vol. 2, pp. 431-434. IEEE-IAS Conference Record, 1988, vol 1, pp. 578-583.

11. Schiferl, R., T.A. Lipo, “Power Capability of Salient Pole Permanent Magnet Synchronous Motors in Variable Speed Drive Applications,” IEEE-IAS Conference Record, Oct. 2-7, 1988, Part 1, pp. 23-31.

12. Ojo, J.O., A. Consoli, T.A. Lipo, “An Improved Model of Saturated Induction Machines,” IEEE-IAS Conference Record, Oct. 1988, Part 1, pp. 222-230.

13. Oyama, J., F. Profumo, E. Muljadi, T.A. Lipo, “Design and Performance of a Digitally Based Voltage Controller for Correcting Phase Unbalance in Induction Machines,” IEEE-IAS Conference Record, Oct. 207, 1988, Part I, pp. 578-583.

14. Lettenmaier, T., D.W. Novotny, T.A. Lipo, “Single Phase Induction Motor with an Electronically Controlled Capacitor,” IEEE-IAS Conference Record, Oct. 2-7, 1988, Part 1, pp. 169-174.

15. Murai, Y., T.A. Lipo, “High Frequency Series Resonant DC Link Power Conversion,” IEEE-IAS Conference Record, Oct. 2-7, 1988, Part I, pp. 772-779.

16. Xu, L.Y., T.A. Lipo, “Analysis of a Variable Speed Single-Salient Reluctance Motor Utilizing Only Two Transistor Switches,” IEEE-IAS Conference Record, Oct. 2-7, 1988, Part 1, pp. 38-43.

17. Lipo, T.A., “Resonant Link Converters: A New Direction in Solid State Power Conversion,” International Conference on Electric Drives, Poiana-Brasov, Romania, Sept. 20-22, 1988, Book I-The Plenary Session, Tenth paper, pp. 87-97. Energia-Electrica, May 1990, vol. 67, no. 5, pp. 231-236.

18. Lipo, T.A., D.W. Novotny, “Induction Motor Application Considerations for Adjustable Speed Drives,” EPRI Workshop on Adjustable Speed Drive Motors, Albany, NY, Aug. 23-24, 1988, pp. 10.

19. Lipo, T.A., “The Potential for High Temperature Superconducting AC and DC Motors,” Electric Machines and Power Systems, 1988, vol. 13, pp. 373-385.

top

1989 Publications

1. Muljadi, E., T.A. Lipo, D.W. Novotny, “Power Factor Enhancement of Induction Machines by Solid State Excitation,” IEEE Transactions on Power Electronics, Oct. 1989, vol. 4, no. 4, pp. 409-418.

2. Moreira, J.C., T.A. Lipo, “Simulation of a Four Phase Switched Reluctance Motor Including the Effects of Mutual Coupling,” Electric Machines & Power Systems, 1989, vol. 16, no. 4, pp. 281-299. (see 1987-7).

3. Ojo, J.O., T.A. Lipo, “An Improved Model for Saturated Salient Pole Synchronous Motors,” IEEE Transactions on Energy Conversion, March 1989, vol. 4, no. 1, pp. 135-142.

4. Schiferl, R., T.A. Lipo, “Core Loss in Buried Permanent Magnet Synchronous Motors,” IEEE Transactions on Energy Conversion, June 1989, vol. 4, no. 2, pp. 279-284.

5. Udayagiri, M.R., T.A. Lipo, “Simulation of Inverter Fed Induction Motors Including Core Losses,” IECON Conference Record, Nov. 6-10, 1989, vol. 1, pp. 232-237.

6. Ojo, J.O., V. Ostovic, J.C. White, T.A. Lipo, “Measurement and Computation of Starting Torque Pulsations of Salient Pole Synchronous Motors,” IEEE Transactions on Energy Conversion, Mar. 1990, vol. 5, no. 1, pp. 176-182.

7. Blasko, V., T.A. Lipo, J.C. Moreira, “A New Field Oriented Controller Utilizing Spatial Position Measurement of Rotor End Ring Current,” IEEE-PESC Conference Record, 1989, vol. 1, pp. 295-300.

8. Sul, S.K., I. Alan, T.A. Lipo, “Performance Testing of a High Frequency Link Converter for Space Station Power Distribution Systems,” IEEE Intersociety Energy Conversion Engineering Conference (IECEC), Washington D.C., Aug. 6-11, 1989, vol. 1, no. 899362, pp. 617-623.

9. Lipo, T.A., H.A. Toliyat, “Feasibility Study of a Converter Optimized Induction Motor,” EPRI RP2624-02.

10. Murai, Y., S. Mochizuki, P. Caldeira, T.A. Lipo, “Current Pulse Control of High Frequency Series Resonant DC Link Power Converter,” IEEE-IAS Conference Record, San Diego, CA, Sept. 1989, Part 1, pp. 1023-1030.

11. Zinger, D.S., T.A. Lipo, D.W. Novotny, “Using Induction Motor Stator Windings to Extract Speed Information,” IEEE-IAS Annual Meeting Conference Record, San Diego, CA, Oct.1989, Part 1, pp. 213-218.

12. Holmes, D.G., T.A. Lipo, “Implementation of a Controlled Rectifier Using AC-AC Matrix Converter Theory,” IEEE-PESC Conference Record,” June 26-29, 1989, pp. 353-359.

13. Oyama, J., T. Higuchi, E. Yamada, T. Koga, T.A. Lipo, “New Control Strategy for Matrix Converter,” IEEE-PESC Conference Record, June 26-29, 1989, vol. 1, pp. 360-367.

14. Sul S.K., F. Profumo, G.H. Cho, T.A. Lipo, “MCTs and IGBTs: A Comparison of Performance in Power Electronic Circuits,” IEEE Power Electronics Specialists' Conference, vol. 1, June 26-29, 1989, pp. 163-169.

1990 Publications

1. Sul, S.K., T.A. Lipo, “Field Oriented Control of an Induction Machine in a High Frequency Link Power System,” IEEE Transactions on Power Electronics, Oct. 1990, vol. 5, no. 6, pp. 436-445.

2. Zinger, D., F. Profumo, T.A. Lipo, D.W. Novotny, “A Direct Field Oriented Controller for Induction Motor Drives Using Tapped Stator Windings,” IEEE Transactions on Power Electronics, Oct. 1990, vol. 5, no. 4, pp. 446-453.

3. Sul, S.K., T.A. Lipo, “Design and Performance of a High Frequency Link Induction Motor Drive Operating at Unity Power Factor,” IEEE Transactions on Industry Applications, May-June 1990, vol. 26, no. 3, pp. 434-440.

4. Schiferl, R., T.A. Lipo, “Power Capability of Salient Pole Permanent Magnet Synchronous Motors in Variable Speed Drive Applications,” IEEE Transactions on Industry Applications, Jan.-Feb.1990, vol. 26, no. 1, pp. 115-123.

5. Ojo, J.O., A. Consoli, T.A. Lipo, “An Improved Model of Saturated Induction Machines,” IEEE Transactions on Industry Applications, Mar.-Apr. 1990, vol. 26, no. 2, pp. 212-221.

6. Oyama, J., F. Profumo, E. Muljadi, T.A. Lipo, “Design and Performance of a Digitally Based Voltage Controller for Correcting Phase Unbalance in Induction Machines,” IEEE Transactions on Industry Applications, May-June 1990, vol. 26, no. 3, pp. 425-433.

7. Xu, L.Y., T.A. Lipo, “Analysis of a Variable Speed Single-Salient Reluctance Motor Utilizing Only Two Transistor Switches,” IEEE Transactions on Industry Applications, Mar.-Apr. 1990, vol. 26, no. 2, pp. 229-236.

8. Caldeira, P., T.A. Lipo, Y. Murai, S. Mochizuki, “Design and Control of a Series Resonant DC Link Power Converter Drive,” IPEC, Apr. 2-6, 1990, vol. 1, pp. 397-404.

9. Fan, F., S. Ji, T.A. Lipo, “A New Energy Recovery Scheme for Doubly fed, Variable Speed Induction Motor Drives,” IEEE International Conference on Applications of Industrial Electronic Systems, May 13-17, 1990, pp. 106-110.

10. Blasko, Y., T. Matsuo, J.C. Moreira, T.A. Lipo, “A New Direct Field Oriented Controller Employing Rotor End Ring Current Detection,” IEEE-PESC Conference Record, 1990, vol. 2, pp. 599-605.

11. Moreira, J.C., T.A. Lipo, “A New Method for Rotor Time Constant Tuning in Indirect Field Oriented Control,” IEEE-PESC Conference Record, 1990, vol. 2, pp. 573-580.

12. Marschke, K.W., P. Caldeira, T.A. Lipo, “Utilization of the Series Resonant DC link as a Conditioning System for SMES,” IEEE-PESC Conference Record, June 10-15, 1990, vol. I, pp. 266-272.

13. Liang, F., L. Xu, T.A. Lipo, “d-q Analysis of a Variable Speed Doubly AC Excited Reluctance Motor,” Electric Machines and Power Systems, 1991, vol 19, no 2, pp. 125-138.

14. Fahim, A., T.A. Lipo, “Calculations of Electromagnetic Fields Including End Effect Using Fourier Transform Method,” ICEM, Aug. 13-15, 1990, vol. 2, pp. 751-756.

15. Jensen, C.C., T.A. Lipo, F. Profumo, “A Low Loss Permanent Magnet Brushless DC Motor Utilizing Tape Wound Amorphous Iron,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part I.

16. Caldeira, P., K.W. Marschke, T.A. Lipo, Y. Murai, “Utilization of the Series Resonant DC Link as a DC Motor Drive,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part 2, pp. 1208-1214.

17. Moreira, J., T.A. Lipo, “Modeling of Saturated AC Machines Including Airgap Flux Harmonic Components,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part 1, pp. 37-44.

18. Xu, L., X. Xu, D.W. Novotny, T.A. Lipo, “Vector Control of Synchronous Reluctance Motor Including Saturation and Iron Loss,” IEEE-IAS Conference Record, 1990, vol. 1, pp. 359-364.

19. Novotny, D.W, R.D. Lorenz, T.A. Lipo, D.M. Divan, “The Electric Machines and Power Electronics Laboratory at the University of Wisconsin,” International Conference on Electrical Machines (ICEM), Boston MA, August 13-15, 1990, pp. 305-308.

20. Moreira, J.C., T.A. Lipo, “Direct Field Orientation Control Using the Third Harmonic Component of the Stator Voltage,” International Conference on Electrical Machines (ICEM), Boston MA, Aug. 13-15, 1990, pp.1237-1242.

21. Toliyat, H., L. Xu, T.A. Lipo, “A Five Phase Reluctance Motor with High Specific Torque,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part 1, pp. 207-213.

22. Mertens, A., P. Caldeira, T.A. Lipo, “Characterization of GTO’s Under Different Modes of Zero Current Switching,” IEEE-PESC Conference Record,” June 24-27, 1991, pp. 444-452.

23. Ojo, J.O, V. Ostovic, T.A. Lipo, J.C. White, “Measurement and Computation of Starting Torque Pulsations of Salient Pole Synchronous Motors,” IEEE Transactions on Energy Conversion, Mar. 1990, vol. 5, no. 1, pp. 176-182.

24. Lipo, T.A., “Resonant Link Converters: A New Direction in Solid State Power Conversion,” L'Energia Elettrica, 1990, vol. LXVII, no. 5, pp. 231-236.

25. T.A. Lipo, F. Benzi, “Azionamenti per l’industria: nuove realizzioni,” April 1990.

1991 Publications

1. Lettenmaier, T., D.W. Novotny, T.A. Lipo, “Single Phase Induction Motor with an Electronically Controlled Capacitor,” IEEE Transactions on Industry Applications, Jan-Feb 1991, vol. 27, no 1, pp 38-43.
2. Moreira, J.C, V. Blasko, T.A. Lipo, “Simple Efficiency Maximizer for an Adjustable Frequency Induction Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct. 1991, vol. 27, no. 5, pp. 940-946.
3. Xu, L., F. Liang, T.A. Lipo, “Transient Model of a Doubly Excited Reluctance Motor,” IEEE Transactions on Energy Conversion, Mar. 1991, vol. 6, no 1, pp. 126-133.

4. Xu, L., X. Xu, D.W. Novotny, T.A. Lipo, “Vector Control of Synchronous Reluctance Motor Including Saturation and Iron Loss,” IEEE Transactions on Industry Applications, Sept.-Oct. 1991, vol. 27, no. 5, pp. 977-985.

5. Toliyat, H.A., T.A. Lipo, J.C. White, “Analysis of a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications Part I: Motor Analysis,” IEEE Transactions on Energy Conversion, Dec. 1991, vol. 6, no 4, pp. 679-683.

6. Toliyat, H.A., T.A. Lipo, J.C. White, “Analysis of a Concentrated Winding Induction Machine for Adjustable Speed Drive Applications Part II: Motor Design and Performance,” IEEE Transactions on Energy Conversion, Dec. 1991, vol. 6, no 4, pp. 684-692.

7. Lipo, T.A, “Novel Reluctance Machine Concepts for Variable Speed Drives,” 6th Mediterranean Electrotechnical Conference, MELECON, New York, May 1991, vol. I, pp. 34-43.

8. Fahim, A.A., T.A. Lipo, D.W. Novotny, “Equivalent Circuit Model for Super Conducting Machine Based on Three Dimensional Field Solution,” SM100 Conference on Evolution and Modern Aspects of Synchronous Machines, Aug. 27-29, 1991, Part 3, pp. 803-805.

9. Lipo, T.A, “Synchronous Reluctance Machines - A Viable Alternative for AC Drives,” SM100 Conference on Evolution and Modern Aspects of Synchronous Machines,” Aug. 27-29, 1991, Part 2, pp. 475-479.

10. Lipo, T.A, “Synchronous Reluctance Machines - A Viable Alternative for AC Drives,” Electric Machines and Power Systems, Nov.-Dec. 1991, vol. 19, no. 6, pp. 659-71.

11. Murai, Y., S.G. Abeyratne, T.A. Lipo, P. Caldeira, “Dual-flow Pulse Trimming Concept for a Series Resonant DC Link Power Conversion,” IEEE-PESC Conference Record, June 24-27, 1991, pp. 254-260.

12. Murai, Y., S.G. Abeyratne, T.A. Lipo, P. Caldeira, “Current Peak Limiting for a Series Resonant DC Link Power Conversion Using a Saturable Core,” EPE/ Fourth European Power Electronics Conference, Sept. 3-6, 1991, vol. 2, pp. 8-12. Electric Machines and Power Systems. Jan.-Feb. 1996, vol. 26 no. 1, pp. 51-63.

13. Moreira, J.C., K.T. Hung, T.A. Lipo, R.D. Lorenz, “A Simple and Robust Adaptive Controller for Detuning Correction in Field Oriented Induction Machines,” In Proceedings of IEEE-IAS Conference Record, 1991 , pp. 397-403.

14. Muljadi, E., Y. Zhao, T.H. Liu, T.A. Lipo, “Adjustable AC Capacitor for a Single Phase Induction Motor,” IEEE-IAS Conference Record, Sept. 28-Oct. 4, 1991, Part 1, pp. 185-190.

15. Liu, T.H., J.R. Fu, T.A. Lipo, “A Strategy for Improving Reliability of Field Oriented Controlled Induction Motor Drives,” IEEE-IAS Conference Record, 1991, Part 1, pp. 449-455.

16. Hava, A., V. Blasko, T.A. Lipo, “A Modified C-dump Converter for Variable Reluctance Machines,” IEEE-IAS Conference Record, Sept. 28-Oct. 4, 1991, Part 1, pp. 886-891.

17. Toliyat, H., M. Rahimian, T.A. Lipo, “DQ Modeling of Five Phase Synchronous Reluctance Machines Including Third Harmonic of Airgap MMF,” IEEE-IAS Conference Record, Sept. 28-Oct. 4, 1991, Part 1, pp. 231-237.

18. Skinner, J., T.A. Lipo, “Input Current Shaping in Brushless DC Motor Drives Utilizing Inverter Current Control,” IEE Conference on Electric Machines and Drives, Sept. 1991, pp. 121-125.

19. Murai, Y., H. Nakamura, T.A. Lipo, M.T. Aydemir, “Pulse-split Concept in Series Resonant DC Link Power Conversion for Induction Motor Drives,” IEEE-IAS Conference Record, 1991, pp. 776-781.

20. Divan, D.M., R.H. Lasseter, T.A. Lipo, R.D. Lorenz, D.W. Novotny, “The Industrial Consortium: A Format for University-Industry Interaction,” American Society for Engineering Education (ASEE) 53rd Annual Meeting, Oct. 6-8, 1991.

21. F. Caricchi, F. Crescimbini, A. Di Napoli, O. Honorati, T.A. Lipo, G. Noia, E. Santini, “Development of an IGBT Inverter Driven Axial-Flux PM Synchronous Motor Drive,” European Power Electronics Conference, Sept. 3-6, 1991, vol. 3, pp. 482-487.

22. Liang, F., L.Y. Xu, T.A. Lipo, “d-q Analysis of a Variable Speed Doubly AC Excited Reluctance Motor,” Electric Machines and Power Systems, 1991, vol. 19, no. 2, pp. 125-138.

23. Liao, F., S. Ji, T.A. Lipo, “A New Energy Recovery Scheme for Doubly Fed, Variable Speed Induction Motor Drives,” IEEE Transactions on Industry Applications, July-Aug. 1991, vol. 27, no.4, pp. 728-733.

1992 Publications

1. Zai, L.C., T.A. Lipo, C.L. DeMarco, “An Extended Kalman Filter Approach to Rotor Time Constant Measurement in PWM Induction Motor Drives,” IEEE Transactions on Industry Applications, Jan.-Feb. 1992, vol. 28, no. 1, pp. 96-104.

2. Murai, Y., T.A. Lipo, “High Frequency Series Resonant DC Link Power Conversion,” IEEE Transactions on Industry Applications, Nov.-Dec. 1992, vol. 28, no. 6, pp. 1277-1285.

3. Holmes, D.G., T.A. Lipo, “Implementation of a Controlled Rectifier Using AC-AC Matrix Converter Theory,” IEEE Transactions on Power Electronics, Jan. 1992, vol. 7, no. 1, pp. 240-250.

4. Marschke, K.W., P. Caldeira, T.A. Lipo, “Utilization of the Series Resonant DC link as a Conditioning System for SMES,” IEEE Transactions on Power Electronics, July 1992, vol. 7, no. 3, pp. 506-513.

5. Jensen, C.C., T.A. Lipo, F. Profumo, “A Low Loss Permanent Magnet Brushless DC Motor Utilizing Tape Wound Amorphous Iron,” IEEE-IAS Conference Record, Oct. 7-12, 1990, Part I.

6. Moreira, J., T.A. Lipo, “Modeling of Saturated AC Machines Including Airgap Flux Harmonic Components,” IEEE Transactions on Industry Applications, Mar.-Apr. 1992, vol. 28, no. 2, pp. 343-349.

7. Toliyat, H., L. Xu, T.A. Lipo, “A Five Phase Reluctance Motor with High Specific Torque,” IEEE Transactions on Industry Applications, May-June 1992, vol. 28, no. 3, pp. 659-667.

8. Moreira, J.C., K.T. Hung, T.A. Lipo, R.D. Lorenz, “A Simple and Robust Adaptive Controller for Detuning Correction in Field Oriented Induction Machines,” IEEE Transactions on Industry Applications, Nov.-Dec. 1992, vol. 28, iss. 6, pp.1359-1366.

9. Hava, A., V. Blasko, T.A. Lipo, “A Modified C-dump Converter for Variable Reluctance Machines,” IEEE Transactions on Industry Applications, Sept.-Oct. 1992, vol. 28, no. 5, pp. 1017-1022.

10. Lipo, T.A., D.M. Divan, “Resonant Links: A New Family of Converter Topologies for Solid State Power Conversion,” ABB Symposium on Power Semiconductor Devices and Circuits, Sept. 26-27, 1992, pp. 291-315.

11. Bhattacharya, S., T.A. Lipo, H.A. Toliyat, M.M. Rahimian, “Transient Analysis of Induction Machines Under Internal Faults Using Winding Functions,” International Conference on Electrical Rotating Machines (ELROMA), Jan.15-16, 1992, vol. III, pp. 1-13.

12. Liao, Y., T.A. Lipo, “A New Doubly Salient Permanent Magnet Motor for Adjustable Speed Drives,” SPEEDAM, May 19-21, 1992, pp. 415-420.

13. Lipo, T.A., J.D. Law, A. Chertok, “Design and Performance of the Field Regulated Reluctance Machine,” IEEE-IAS Conference Record, 1992, vol. 1, pp. 234-241.

14. Ledwich, G., E. da Silva, T.A. Lipo, “Soft Switched Notching Current Source Inverters,” IEEE-PESC, June 29-July 3, 1992, vol. II, pp. 1093-1097.

15. Lipo, T.A., M. Aydemir, E. da Silva, G. Ledwich, “Impact of control Strategy on Component Ratings of Series Resonant DC Link Current Converter,” ACEMP’92/Aegean Conference on Electrical Machines and Power Electronics, May 27-29, 1992, pp. 511-516.

16. Lipo, T.A., Y. Liao, “Effect of Saturation Third Harmonic on the Performance of Squirrel-Cage Induction Machines,” International Conference on Electrice Machines, Sept. 15-17, 1992, vol. II, pp. 278-282.

17. Park, S.S., T.A. Lipo, “New Series Resonant Converter for Variable Reluctance Motor Drive,” IEEE-PESC Conference Record, June 29-July 3, 1992, vol. 2, pp. 833-838.

18. Lipo, T.A., J.R. Fu, “Improving Reliability of Induction Motor Drives by Means of Fast Acting Current Regulation,” 1st European Conference on Reliability, Standardization and Certification of Industrial Electric Drives, May 15-27, 1992.

19. Liang, F.; T.A. Lipo, “A New Variable Reluctance Motor Utilizing Auxiliary Commutation Winding,” IEEE IAS Annual Meeting Conference Record, Oct. 4-9, 1992, vol. 1, pp. 219 – 225.

20. Alan, I., T.A. Lipo, “A Completely Isolated Three-phase to Three-phase Induction Motor/Induction Generator Power Conversion System,” IEEE-IAS Annual Meeting Conference Record, Oct. 4-9 1992, vol.1, pp. 978 – 985.

21. Moreira, J., L. Kreindler, A. Testa, T.A. Lipo, “Direct Field Orientation Controller Using the Stator Phase Voltage Third Harmonic,” IEEE-IAS Conference Record, 1992, vol. 1, pp. 508-514.

22. da Silva, E., G. Ledwich, M. Aydemir, T.A. Lipo, “Pulse Width Modulated Series Resonant Converter,” IEEE-IAS Conference Record, Oct. 4-9, 1992, vol. I, pp. 744-749.

23. Liao, Y., F. Liang., T.A. Lipo, “A Novel Permanent Magnet Motor with Doubly Salient Structure,” IEEE IAS Conference Record, Oct. 1992, vol I, pp. 308-314.

24. Caricchi, F., F. Crescimbini, T.A. Lipo, E. Santini, “Innovative Inverter Topology for Concentrated Winding PM Motor Drives,” IEEE-PESC Conference Record, 1992, vol. 2, pp. 964-972.

25. da Silva, E., G. Ledwich, T.A. Lipo, C.B. Jacobina, “DC Link Notching Current Inverter for Soft Communication,” Congresso Brasileiro de Automica, Soc. Bras. De Automatica, Brazilian, Sept. 1992, pp. 80-85.

1993 Publications

1. Moreira, J.C., T.A. Lipo, “A New Method for Rotor Time Constant Tuning in Indirect Field Oriented Control,” IEEE Transactions on Power Electronics, Oct. 1993, vol. 8, no. 4, pp. 626-631.

2. Caldeira, P., K.W. Marschke, T.A. Lipo, Y. Murai, “Utilization of the Series Resonant DC Link as a DC Motor Drive,” IEEE Transactions on Industry Applications, Sept.-Oct. 1993, vol. 29, no. 5, pp. 949-958.

3. Muljadi, E., Y. Zhao, T.H. Liu, T.A. Lipo, “Adjustable AC Capacitor for a Single Phase Induction Motor,” IEEE Transactions on Industry Applications, May-June 1993, vol. 29, no. 3, pp. 479-485.

4. Liu, T.H., J.R. Fu, T.A. Lipo, “A Strategy for Improving Reliability of Field Oriented Controlled Induction Motor Drives,” IEEE Transactions on Industry Applications, Sept.-Oct. 1993, vol. 29, no. 5, pp. 910-918.

5. Kutkut, N.H., H.M. Cherradi, T.A. Lipo, “Analysis of Induction Motor with Voltage Control by Symmetrically Triggered Thyristors using Quasi-rotating Reference Frame,” IMACS TCI-93, July 7-9, 1993, pp. 13-21.

6. Zhao, Y., Y. Li, T.A. Lipo, “Force Commutated Three-Level Boost Type Rectifier,” IEEE-IAS Conference Record, Oct. 1993, vol. II, pp. 771-777.

7. Li, H..Y., F. Liang, Y. Zhao, T.A. Lipo, “A Doubly Salient Doubly Excited Variable Reluctance Motor,” IEEE-IAS Conference Record, Oct. 1993, vol. I, pp. 137-143.

8. Liao, Y.; T.A. Lipo, “Sizing and Optimal Design of Doubly Salient Permanent Magnet Motors,” IEE 6th International Conference on Electric Machines and Drives, Sept. 8-10, 1993, pp. 452-456.

9. Shakal, A., Y. Liao, T.A. Lipo, “A Permanent Magnet AC Machine Structure with True Field Weakening Capability,” IEEE International Symposium on Industry Electronics, June 1-3, 1993, pp. 19-24.

10. Kreindler, L., A. Testa, T.A. Lipo, “Position Sensorless Synchronous Reluctance Motor Drive Using the Stator Phase Voltage Third Harmonic,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 679-686.

11. Hava, A., J. Wacknov, T.A. Lipo, “New ZCS Resonant Power Converter Topologies for Variable Reluctance Machine Drives,” IEEE-PESC, June 20-24, 1993, pp. 432-439.

12. Matsuo, T., T.A. Lipo, “Field Oriented Control of Synchronous Reluctance Machine,” IEEE-PESC Conference Record, 1993, pp. 425-431.

13. Fahim, A.A., T.A. Lipo, C.J. Slavic, “Electromagnetic Model for Evaluation of Flux Harmonics and Resulting Vibrations in Induction Motors,” IEE 6th International Conference on Electrical Machines and Drives, Sept. 8-10, 1993, pp. 540-545.

14. Dostal, Z., T.A. Lipo, B.J .Chalmers, “Influence of Current Wave Shape on Motoring Performance of the Slotless Permanent Magnet Machine Torus,” IEE 6th International Conference on Electric Machines and Drives, Sept. 8-10, 1993, pp. 376-380.

15. Nakamura, H., Y. Murai, T.A. Lipo, “Quasi Current Resonant DC Link AC/AC Converter,” IEEE Power Electronics Specialists Conference Record, June 20-24,1993, pp. 279–284.

16. Arefeen, M.S., M. Ehsani, T.A. Lipo, “Elimination of Discrete Position Sensor for Synchronous Reluctance Motor,” IEEE-PESC Conference Record, 1993, pp. 440-445.

17. da Silva, E., G. Ledwich, T.A. Lipo, C.B. Jocabina, “DC Link Notching Current Inverter with Soft Commutation,” IEEE-PESC Conference Record, June 1993.

18. Osama, M., K. Sakkoury, T.A. Lipo, “Transient Behavior Comparison of Saturated Induction Machine Models,” IMACS-TCI-93 Computational Aspects of Electromechanical Energy Converters and Drives, July 7-9, 1993, pp. 577-580.

19. Fu, J.R., T.A. Lipo, “A Strategy to Isolate the Switching Device Fault of a Current Regulated Motor Drive,” IEEE-IAS Conference Record, Oct. 2-8, 1993, vol. II, pp. 1015-1020.

20. Muljadi; E., T.A. Lipo, “Series Compensated PWM Inverter with Battery Supply Applied to an Isolated Induction Generator,” IEEE-IAS Conference Record, 1993, vol. 2, pp. 1392-1400.

21. Fu, J.R., T.A. Lipo, “Disturbance Free Operation of a Multiphase Current Regulated Motor Drive with an Opened Phase,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 637-644.

22. Matsuo, T., T.A. Lipo, “Current Sensorless Field Oriented Control of Synchronous Reluctance Motor,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 672-678.

23. Chen, S., E. Zhong, T.A. Lipo, “A New Approach to Motor Condition Monitoring in Induction Motor Drives,” IEEE-IAS Conference Record, 1993, vol. 1, pp. 645-650.

24. Wallace, R., T.A. Lipo, J. Tapia, L. Moran, “Design and Construction of Permanent Magnet Axial Flux Synchronous Generator,” X Congresso Chileno de Ingenieria Electrica, Nov. 1993.

25. Sun, C., X. Luo, T.A. Lipo, “Indirect Field Oriented Control of Induction Machine Utilizing a Reactive Power Perturbation Scheme,” IMACS-TCI-93 Computational Aspects of Electromechanical Energy Converters and Drives, Montreal, Canada, July 7-9, 1993, pp. 403-407.

26. Arefeen, M.S., M. Ehsani, T.A. Lipo, “An Analysis of the Accuracy of Indirect Shaft Sensor for Synchronized Reluctance Motor,” IEEE - IAS Annual Meeting Conference Record, Oct. 2-8, 1993, vol. 1, pp. 695-700.

27. Luo, X., T.A. Lipo, Y. Liao, H. Toliyat, A. El-Anatably, “Multiple Coupled Circuit Modeling of Induction Machines,” IEEE-IAS Conference Record, Oct. 1993, vol I, pp. 203-210.

28. Zhong, E., S. Chen, T.A. Lipo, “Improvements in EMI Performance of Inverter-Fed Motor Drives,” APEC Conference Record, 1994, vol. 2, pp. 608-614.

29. Toliyat H.A., M.M. Rahimian, T.A. Lipo, “Analysis and Modeling of Five Phase Converters for Adjustable Speed Drive Applications,” European Power Electronics Conference (EPE), Brighton, England, Sept. 1993, vol. 5, pp. 194-199.

30. Yoshida, M., H. Soebagia, Y. Murai, T.A. Lipo, “Series Resonant DC Link Dual Converter as a DC Motor Drive,” European Power Electronics Conference (EPE), Brighton, England, Sept. 1993, vol. 5, pp. 188-193.

31. da Silva, E.R.C., G. Ledwich, M.T. Aydemir, T.A. Lipo, “A PWM High Frequency Series Resonant DC Link Converter and Its Utilization as a DC Motor Drive,” 2nd Brazilian Power Electronics Conference (COBEP93), Uberlandia MG, Brazil, Nov. 29 – Dec. 2, 1993.

32. Liao, Y., T.A. Lipo, “Effect of Saturation Third Harmonic on the Performance of Squirrel-Cage Induction Machines,” Electric Machines and Power Systems, Mar.-Apr., 1993, vol. 22, no. 2, pp. 155-173.

1994 Publications

1. Blasko, Y., T. Matsuo, J.C. Moreira, T.A. Lipo, “Field Oriented Control of Induction Machines Employing Rotor End Ring Current Detection,” IEEE-PESC Conference Record, 1990, vol. 2, pp. 599-605.

2. Mertens, A., P. Caldeira, T.A. Lipo, “Characterization of GTO’s Under Different Modes of Zero Current Switching,” IEEE Transactions on Power Electronics, May 1994, vol. 9, no 3, pp. 338-345.

3. Murai, Y., H. Nakamura, T.A. Lipo, M.T. Aydemir, “Pulse-split Concept in Series Resonant DC Link Power Conversion for Induction Motor Drives,” IEEE Transactions on Industry Applications, Jan.-Feb. 1994, vol. 30, no 1, pp. 45-51.

4. Liao, Y., T.A. Lipo, “A New Doubly Salient Permanent Magnet Motor for Adjustable Speed Drives,” Electric Machines and Power Systems, Mar.-Apr. 1994, vol. 22, no. 2, pp. 259-70.

5. Lipo, T.A., J.D. Law, A. Chertok, “Design and Performance of the Field Regulated Reluctance Machine,” IEEE Transactions on Industry Applications, Sept.-Oct.1994, vol. 30, no 5, pp. 1185-1192.

6. Lipo, T.A., Y. Liao, “Effect of Saturation Third Harmonic on the Performance of Squirrel-Cage Induction Machines,” Electrical Machines and Power Systems, Mar.-Apr. 1994, vol. 22, no. 2, pp. 155-73.

7. Liang, F.; T.A. Lipo, “A New Variable Reluctance Motor Utilizing Auxiliary Commutation Winding,” IEEE Transactions on Industry Applications, Mar.-Apr. 1994, vol. 30, no 2, pp. 423-432.

8. Alan, I., T.A. Lipo, “Control of a Polyphase Induction Generator/Induction Motor Power Conversion System Completely Isolated from the Utility,” IEEE Transactions on Industry Applications, May-June 1994, vol. 30, no 3, pp. 636-647.

9. Moreira, J., L. Kreindler, A. Testa, T.A. Lipo, “Direct Field Orientation Controller Using the Stator Phase Voltage Third Harmonic,” IEEE Transactions on Industry Applications, Mar.-Apr. 1994, vol. 30, no. 2, pp. 441-447.

10. Caricchi, F., F. Crescimbini, T.A. Lipo, E. Santini, “Converter Topology with Load-neutral Modulation for Trapezoidal-EMF PM Motor Drives,” IEEE Transactions on Power Electronics, Mar. 1994, vol. 9, no 2, pp. 232-239.

11. Nakamura, H., Y. Murai, T.A. Lipo, “Quasi Current Resonant DC Link AC/AC Converter,” IEEE Transactions on Power Electronics, Nov. 1994, vol. 9, no 6, pp. 594-600.

12. Matsuo, T., T.A. Lipo, “Rotor Design Optimization of Synchronous Reluctance Machine,” IEEE Transactions on Energy Conversion, June 1994, vol. 9, no 2, pp. 359-365.

13. Muljadi; E., T.A. Lipo, “Series Compensated PWM Inverter with Battery Supply Applied to an Isolated Induction Generator,” IEEE Transactions on Industry Applications, July-Aug. 1994, vol .30, no. 4, pp. 1073-1082.

14. Fu, J.R., T.A. Lipo, “Disturbance Free Operation of a Multiphase Current Regulated Motor Drive with an Opened Phase,” IEEE Transactions on Industry Applications, Sept.-Oct. 1994, vol. 30, no 5, pp. 1267-1274.

15. Chen, S., E. Zhong, T.A. Lipo, “A New Approach to Motor Condition Monitoring in Induction Motor Drives,” IEEE Transactions on Industry Applications, July-Aug. 1994, vol. 30, no 4, pp. 905-911.

16. Arefeen, M.S., M. Ehsani, T.A. Lipo, “An Analysis of the Accuracy of Indirect Shaft Sensor for Synchronized Reluctance Motor,” IEEE Transactions on Industry Applications, Sept.-Oct. 1994, vol. 30, no 5, pp. 1202-1209.

17. Toliyat, H., T.A. Lipo, “Analysis of Concentrated Winding Induction Machines for Adjustable Speed Drive Aplications - Experimental Results,” IEEE Transactions on Energy Conversion, Dec. 1994, vol. 9, no. 4, pp. 695-700.

18. Zhong, E., S. Chen, T.A. Lipo, “Improvements in EMI Performance of Inverter-Fed Motor Drives,” IEEE-APEC Conference Record, Orlando, FL, Feb. 13-17, 1994, pp. 608-614.

19. da Silva, E.R.C., G. Ledwich, M.T. Aydemir, T.A. Lipo. “A PWM High Frequency Series Resonant DC Link Converter and its Utilization as a DC Motor Drive,” IEEE-IAS Annual Meeting, Oct. 2-7, 1994.

20. Lorenz, R.D., T.A. Lipo, D.W. Novotny, “Motion Control with Induction Motors,” IEEE Proceedings Special Issue on Power Electronics and Motion Control, Aug. 1994, vol. 82, no. 8, pp. 1215-1240.

21. Toliyat, H.A., M.M. Rahimian, T.A. Lipo, “Analysis and Modeling of Five Phase Converters for Adjustable Speed Drive Applications,” European Power Electronics Conference, Brighton, England, Sept. 1993, vol. 5, pp. 194-199.

22. Mohamed, M.O.E., T.A. Lipo, “A New Induction Machine Model for Analysis of Eccentric Rotor Magnetic Pull,” SPEEDAM Conference, June 7-9, 1994, vol. 1, pp. 173-177.

23. Mezs, P., F. Nozari, A. Julian, C. Sun, T.A. Lipo, “Sensorless Synchronous Motor Drive for Use on Commercial Transport Airplanes,” IEEE-IAS Conference Record, Oct. 2-7, 1994, pp. 553-559.

24. Sarlioglu, B., Y. Zhao, T.A. Lipo, “A Novel Doubly Salient Permanent Magnet Generator,” IEEE-IAS Conference Record, Oct. 2-7, 1994, vol. 1, pp. 9-15.

25. Abeyratne, S.G., M.T. Aydemir, T.A. Lipo, Y. Murai, “Current Clamped, PWM, Quasi-Resonant DC Link Series Resonant Converter,” IEEE-IAS Conference Record, Oct. 2-7, 1994, vol. 2, pp. 820-826.

26. Shakal, A.J., Y. Liao, T.A. Lipo, “A Permanent Magnet AC Machine Structure with True Field Weakening Capability,” IEEE International Symposium on Ind. Elect., June 1-3, 1993, pp. 19-24.

27. Yoshida, M., H. Soebagia, Y. Murai, T.A. Lipo, “Series Resonant DC Link Dual Converter as a DC Motor Drive,” European Power Elect. Conference, Sept. 1993, vol. 5, pp. 188-193.

28. Zhao, Y., T.A. Lipo, “Space Vector PWM Control of Dual Three Phase Induction Machine Using Vector Space Decomposition,” IEEE-IAS Conference Record, Oct. 2-7, 1994, pp. 742-749.

29. Hochgraf, C., R. Lasseter, D.M. Divan, T.A. Lipo, “Comparison of Multilevel Inverters for Static Var Compensation,” IEEE-IAS Conference Record, Oct. 2-7, 1994, vol. 2, pp. 921-928.

30. Ometto, A., A. Julian, T.A. Lipo, “A Novel Low Cost Variable Reluctance Motor Drive,” International Conference on Electrical Machines, Sept. 5-8, 1994.

31. Arafeen, M.S.;,M. Ehsani, T.A. Lipo, “Indirect Startup Rotor Position Sensor for Synchronous Reluctance Motor,” IEEE-APEC, 1994, vol. 1, pp. 78-82.

32. Matsuo, T., T.A. Lipo, “Rotor Position Detection Scheme for Synchronous Reluctance Motor Based on Current Measurements,” IEEE-IAS Conference Record, Oct. 2-7, 1994, pp. 627-634.

33. Chen, S., T.A. Lipo, “A Passively Clamped Quasi Resonant DC Link Inverter,” IEEE-IAS Conference Record, Oct. 2-7, 1994, vol. 2, pp. 841-848.

34. Klabunde, M.C., Y. Zhao, T.A. Lipo, “Current Control of a Three-level Rectifier/Inverter Drive System,” IEEE-IAS Conference Record, Oct. 2-7, 1994, vol. 2, pp. 859-866.

35. Lou, X., A. El-Antably, T.A. Lipo, “Multiple Coupled Circuit Modeling of Synchronous Reluctance Machines,” IEEE-IAS Conference Record, 1994, vol. 1, pp. 281-289.

36. Ometto, A., A. Julian, T.A. Lipo, “A Novel Low Cost for Variable Reluctance Motor Drive,” International Conference on Electrical Machines, Paris, France, Sept. 5-8, 1994.

37. Hava, A., T.A. Lipo, W.L. Erdman, “Utility Interface Issues For Line Connected PWM Voltage Source Converters: A Comparative Study,” Applied Power Electronics Conference and Exposition, Mar.1995, vol.1, iss. 0, pp.125-132.

38. Murai, Y., H. Ishikawa, T.A. Lipo, “New Series Resonant DC Link Inverter For Electric Vehicle Drives,” IEEE IAS Annual Meeting Conference Record, 1994, vol. 1, pp. 443-447.

39. Arafeen, M.S., M. Ehsani, T.A. Lipo, “Sensorless Position Measurement in Synchronous Reluctance Motor,” IEEE Transactions on Power Electronics, Nov. 1994, vol. 9, no. 6, pp. 624-630.

1995 Publications

1. Liao, Y., F. Liang., T.A. Lipo, “A Novel Permanent Magnet Motor with Doubly Salient Structure,” IEEE Transactions on Industry Applications, Sept.-Oct. 1995, vol. 31, no. 5, pp. 1069-1078.

2. Zhao, Y., Y. Li, T.A. Lipo, “Force Commutated Three-Level Boost Type Rectifier,” IEEE Transactions on Industry Applications, Jan.-Feb.1995, vol. 31, no. 1, pp. 155-161.

3. Li, H..Y., F. Liang, Y. Zhao, T.A. Lipo, “A Doubly Salient Doubly Excited Variable Reluctance Motor,” IEEE Transactions on Industry Applications, Jan.-Feb. 1995, vol. 31, no. 1, pp. 99-106.

4. Luo, X., T.A. Lipo, Y. Liao, H. Toliyat, A. El-Anatably, “Multiple Coupled Circuit Modeling of Induction Machines,” IEEE Transactions on Industry Applications, Mar.-Apr. 1995, vol. 31, no. 2, pp. 311-318.

5. Mezs, P., F. Nozari, A. Julian, C. Sun, T.A. Lipo, “Sensorless Synchronous Motor Drive for Use on Commercial Transport Airplanes,” IEEE Transactions on Industry Applications, July-Aug. 1995, vol. 31, no. 4, pp. 850-859.

6. Zhao, Y., T.A. Lipo, “Space Vector PWM Control of Dual Three Phase Induction Machine Using Vector Space Decomposition,” IEEE Transactions on Industry Applications, Sept.-Oct. 1995, vol. 31, no. 5, pp. 1100-1109.

7. Arafeen, M.S., M. Ehsani, T.A. Lipo, “Sensorless Position Measurement in Synchronous Reluctance Motor,” IEEE Transactions on Power Electronics, Nov. 1994, vol. 9, no 6, pp. 624-630.

8. Matsuo, T., T.A. Lipo, “Rotor Position Detection Scheme for Synchronous Reluctance Motor Based on Current Measurements,” IEEE Transactions on Industry Applications, July-Aug. 1995, vol. 31, no. 4, pp. 860-868.

9. Toliyat, H.A., T.A. Lipo, “Transient Analysis of Cage Induction Machines Under Stator, Rotor Bar, and End Ring Faults,” IEEE Transactions on Energy Conversion, June1995, vol. 10, no. 2, pp. 241-247

10. Chen, S., T.A. Lipo, “Soft-Switched Inverter for Electric Vehicle Drives,” APEC Conference Record, Mar. 5-9, 1995, vol. 2, pp. 586-591.

11. Sarlioglu, B., T.A. Lipo, “Comparison of Power Production Capability Between Doubly Salient Permanent Magnet and Variable Reluctance Type Generators,” International Aegean Conference on Electrical Machines & Power Electronics Conference Record, June 5-7, 1995.

12. Li, Y., F. Leonardi, T.A. Lipo, “A Novel Doubly Salient Permanent Magnet Generator Capable of Field Weakening,” International Conference on Design to Manufacturing in Modern Industry, May 29-30, 1995.

13. Chen, S., T.A. Lipo, D. Fitzgerald, “Measurement and Analysis of Induction Motor Bearing Currents in PWM Inverter Drives,” IEEE Summer Power Meeting, July 1995.

14. Osama, M., T.A. Lipo, “A New Inverter Control Scheme for Induction Motor Drives Requiring Wide Speed Range,” IEEE - IAS Annual Meeting Conference Record, Oct. 8-12, 1995, vol. 1 ,pp. 350 – 355.

15. Chen, S., T.A. Lipo, D. Fitzgerald, “Modeling of Motor Bearing Currents in PWM Inverter Drives,” IEEE-IAS Conference Record, 1995, pp. 388-393.

16. Sinha, G., C. Hochgraf, R.H. Lasseter, D.M. Divan, T.A. Lipo, “Fault Protection in a Multilevel Inverter Implementation of a Static Condenser,” IEEE-IAS Conference Record, Oct. 8-12, 1995, pp. 2557-2564.

17. Hava, A.M., T.A. Lipo, W.L. Erdman, “Utility Interface Issues for Line Connected PWM Voltage Source Converters: A Comparative Study,” APEC Conference Record, Mar. 1995, vol. 1, pp. 125-132.

18. Lipo, T.A., Y. Li, “A Doubly Salient Permanent Magnet Motor Capable of Field Weakening,” IEEE - Power Electronics Specialists Conference, June 1995, vol. 1, pp. 565 – 571.

19. Kutkut, N.H., H.M. Cherradi, T.A. Lipo, “Analysis of Voltage Controlled Induction Motors Using Quasi-Rotating Reference Frame,” Mathematics and Computers in Simulation, 1995, vol. 38, no. 2, pp. 304-310.

20. Zhong, E., S. Chen, T.A. Lipo, “Improvements in EMI Performance of Inverter-Fed Motor Drives,” IEEE Transactions on Industry Applications, Nov.-Dec. 1995, vol. 31, no. 6, pp. 1247-1256.

21. Chen, S., B. J. C. Filho, T.A. Lipo, “Design and Implementation of a Passively Clamped Quasi Resonant DC Link Inverter,” IEEE IAS Annual Meeting, Oct. 8-12, 1995, vol. 3, pp. 2387-2392.

22. Lipo, T.A.,Y. Li, “The CFM - A New Family of Electrical Machines,” IPEC Conference Record, Japan, Apr. 3-7, 1995, pp. 1-8.

1996 Publications

1. Chen, S., T.A. Lipo, D. Fitzgerald, “Source of Induction Motor Bearing Currents Caused by PWM Inverters,” IEEE Transactions on Energy Conversion, Mar. 1996, vol. 11, no. 1, pp. 25-32.
2. Law, J.D., T.J. Busch, T.A. Lipo, “Magnet Circuit Modeling of the Field Regulated Reluctance Machine. Part I: Model Development,” IEEE Transactions on Energy Conversion, 1996, vol. 2, no. 1, pp. 49-55.
3. Law, J.D., T.J. Busch, T.A. Lipo, “Magnet Circuit Modeling of the Field Regulated Reluctance Machine. Part II: Saturating Modeling and Results,” IEEE Transactions on Energy Conversion, 1996, vol. 2, no. 1, pp. 56-61.

4. Chen, S., T.A. Lipo, D. Fitzgerald, “Measurement and Analysis of Induction Motor Bearing Currents in PWM Inverter Drives,” IEEE Transactions on Industry Applications, Nov.-Dec. 1996, vol. 32 , iss. 6 , pp. 1365 – 1370.

5. Zhao, Y., T.A. Lipo, “Field-Oriented Control of Multi-Phase Induction Machine with Structural Unbalance,” APEC Conference Record, 1996, pp. 380-386.

6. Osama, M., T.A. Lipo, “A New Inverter Control Scheme for Induction Motor Drives Requiring Wide Speed Range,” IEEE Transactions on Industry Applications, July-Aug. 1996, vol. 32, no. 4, pp. 938-944.

7. Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 578-584.

8. Leonardi, F., T. Matsuo, T.A. Lipo, “Iron Loss Calculation for Synchronous Reluctance Machines,” IEEE-PEDES, Jan. 8-11, 1996, pp. 307-312.

9. Zhao, Y., T.A. Lipo, “An Approach to Modeling and Field-Oriented Control of a Three-Phase Induction Machine with Structural Unbalance,” IEEE-APEC Conference Record, Apr. 1996, pp. 380-386.

10. Julian, A., D. Divan, T. Lipo, F. Nozari, P. Mezs, “Double Bridge Resonant DC Link Converter with Variable Input and Output Frequency,” IEEE-APEC Conference Record, Apr. 1996, pp. 181-186.

11. Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE-IAS Conference Record, San Diego, CA, Oct. 6-11, 1996, pp. 980-987.

12. De Broe, A.M., A.L. Julian, T.A. Lipo, “Neutral-to-Ground Voltage Minimization in a PWM-Rectifier/Inverter Configuration,” IEE Conference on Power Electronics and Variable Speed Drives, Sept. 23-25, 1996, pp. 564-568.

13. Bernet, S., T. Matsuo, T.A. Lipo, “A Matrix Converter Using Reverse Blocking NPT-IGBT’s and Optimized Pulse Patterns,” IEEE-PESC Conference Record, June 1996, pp. 107-113.

14. Leonardi, F., Y. Li, T. Matsuo, T.A. Lipo, P. McCleer, “Design Considerations and Test Results for a Doubly Salient PM Motor with Flux Control,” IEEE-IAS Conference Record, Oct. 6-11, 1996, pp. 458-463.

15. Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE-IAS Conference Record, Oct.1996, pp. 836-842.

16. Lipo, T., G. Oriti, A. Julian, “Elimination of Common Mode Voltage in Three-Phase Sinusoidal Power Converters,” IEEE-PESC, June 24-27, 1996, pp. 1968-1972.

17. S. Bhattacharya, L. Resta, D.M. Divan, D.W. Novotny, T.A. Lipo, “Experimental Comparison of Motor Bearing Currents with PWM Hard and Soft Switched Voltage Source Inverters,” IEEE-PESC, Italy, June 1996, pp. 1528-1534.

18. Luo, X., D.Qin, T.A. Lipo, “A Novel Two Phase Doubly Salient Permanent Magnet Motor,” IEEE-IAS Conference Record, Oct. 1996, pp. 808-815.

19. Osama, M., T.A. Lipo, “Modeling and Analysis of a Wide Speed Range Induction Motor Drive Based on Electronic Pole Changing,” IEEE-IAS Conference Record, Oct. 1996, pp. 357-364.

20. Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Application of the Matrix Converter to Induction Motor Drives,” IEEE-IAS Conference Record, Oct. 1996, pp. 60-67.

21. Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Modeling and Simulation of Matrix Converter/Induction Motor Drive,” IMACS Conference, Sept.1996.

22. Zhong, E., T.A. Lipo, J.R. Jaeschke, D. Gritter, “Analytical Estimation and Reduction of Conducted EMI Emissions in High Power PWM Inverter Drives,” IEEE PESC Conference Record, Italy, June 1996, pp. 1169-1175.

23. Chen, S., T.A. Lipo, D.W. Novotny, “Circulating Type Motor Bearing Current in Inverter Drives,” IEEE-IAS Conference Record, Oct. 1996, pp. 162-167.

24. Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE-IAS Conference Record, San Diego, CA, Oct. 1996, pp. 836-842.

25. Abeyratne, S.G., J. Horikawa, Y. Murai, T.A. Lipo, “Current-Clamped, Modified Series Resonant DC-Link Power Converter and Control Strategies,” IEE Transactions, Japan, 1996, vol. 116-D, no. 11, pp. 1145-1152.

26. Bernet, S., K. Bernet, T.A. Lipo, “The Auxiliary Resonant Commutated Pole Matrix Converter-A New Topology for High Power Applications,” IEEE-IAS Conference Record, Oct. 1996, pp. 1242-1249.

27. Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE-IAS Conference Record, Oct.1996, pp. 980-987.

28. Leonardi, F., T. Matsuo, Y. Li, T.A. Lipo, P. McCleer, “Design Considerations and Test Results for a Doubly Salient PM Motor with Flux Control,” IEEE-IAS Conference Record, San Diego, CA, Oct. 1996, pp. 458-463.

29. Lipo, T.A, “Advanced Motor Technologies: Converter Fed Machines (CFMs),” International Conference on Energy Efficiency Improvements in Electric Motors, Oct. 1996.

30. Cardoso-Filho, B.J., T.A. Lipo, “Space Vector Analysis and Modulation Issues of Passively Clamped Quasi-Resonant Inverters,” IEEE-IAS Conference Record, 1996, pp. 1179-1185.

31. Soebagia, H., M. Yochida, Y. Murai, T.A. Lipo, “Input Power Factor Control of AC-DC Series Resonant DC Link Converter Using PID Operation,” IEEE Transactions on Power Electronics, Jan.1996, vol. 11, no. 1, pp. 43-48.

32. Murai, Y.; S.G. Abeyratne; T.A. Lipo; P. Caldeira, “Current Peak Limiting for a Series Resonant DC Link Power Conversion Using a Saturable Core,” Electric Machines and Power Systems, 1996, vol. 24, no. 1, pp. 51-64.

33. Chen, S., T.A. Lipo, “A Novel Soft-Switched Inverter for AC Motor Drives,” IEEE Transactions on Power Electronics, July 1996, vol. 11, no. 4, pp. 653-659.

34. Shakal, A., Y. Liao, T.A. Lipo, “A New Permanent Magnet Motor Structure with True Field Weakening,” Electric Machines and Power Systems, 1996, vol. 24, no. 5, pp. 497-510.

35. Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance, Part 1: Machine Modeling and Multi-Dimensional Current Regulator,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 570-577.

36. Zhao, Y., T.A. Lipo, “Modeling and Control of Multi-Phase Induction Machine with Structural Unbalance, Part 2: Field Oriented Control and Experimental Verification,” IEEE Transactions on Energy Conversion, Sept.1996, vol. 11, no. 3, pp. 578-584..

37. Fu, J.R.; T.A. Lipo, “A Strategy to Isolate the Switching Device Fault of a Current Regulated Motor Drive,” Electrical Machines and Power Systems, Dec. 1996, vol. 24, no. 8, pp. 911-920.

38. Caricchi, F., F. Crescimbini, T.A. Lipo, “Study of a Permanent Magnet Excited Axial Flux Electromagnetic Differential Motor for Wheel Direct Drive Application,” SPEEDAM, 1996, vol. C4, pp. 21-28.

39. Matsuo, T., A. El-Antably, T.A. Lipo, “A New Control Strategy for Optimum Efficiency Operation of a Synchronous Reluctance Motor,” IEEE-IAS Conference Record, Oct. 1996, pp. 109-116.

40. Kim, G.T., T.A. Lipo, “VSI-PWM Rectifier/Inverter System with Reduced Switch Count,” IEEE Transactions on Industry Applications, Nov.-Dec. 1996, vol. 32, no. 6, pp. 1331-1337.

1997 Publications

1. Wallace, R., T.A. Lipo, J. Tapia, L. Moran, “Design and Construction of Permanent Magnet Axial Flux Synchronous Generator,” IEEE Electric Machines and Drives Conference Record, May 18-21, 1997, pp. MA1/4.1-4.3.

2. Osama, M., T.A. Lipo, “Modeling and Analysis of a Wide Speed Range Induction Motor Drive Based on Electronic Pole Changing,” IEEE Transactions on Industry Applications, Sept.-Oct.1997, vol. 33, no. 5, pp. 1177-1184.

3. Qin, D., X. Luo, T.A. Lipo, “Reluctance Motor Control for Fault-Tolerant Capability,” IEEE-IEMDC, Milwaukee, WI, May 18-21, 1997, pp. WA1-1.1-WA1-1.6.

4. Abeyratne, S.G., J. Horikawa, Y. Murai, T.A. Lipo, “Current-Clamped, Modified Series Resonant DC-Link Power Converter for a General Purpose Induction Motor Drive,” IEEE Transactions on Power Electronics, Mar.1997, vol. 12, no. 2, pp. 201-212.

5. Matsuo, T., A. El-Antably, T.A. Lipo, “A New Control Strategy for Optimum Efficiency Operation of a Synchronous Reluctance Motor,” IEEE Transactions on Industry Applications, Sept.-Oct. 1997, vol. 33, no. 5, pp. 1146-1153.

6. Munoz-Garcia, A., T.A. Lipo, D.W. Novotny, “A New Induction Motor Open-Loop Speed Control Capable of Low Frequency Operation,” IEEE-IAS Conference Record, Oct. 5-9, 1997, vol. 1, pp.579-586.

7. Hava, A.M., R.J. Kerkman, T.A. Lipo, “A High Performance Generalized Discontinuous PWM Algorithm,” IEEE-APEC Conference Record, Feb. 23-27, 1997, pp. 886-894.

8. Sinha, G., T.A. Lipo, “A PEBB Based Inverter-System Integration,” Accepted for Government Microcircuit Applications Conference (GOMAC), Mar. 1997.

9. Stankovic, A., E.R. Benedict, V. John, T.A. Lipo, “A Novel Method for Measuring Induction Machine Magnetizing Inductance,” IEEE-IAS Conference Record, Oct. 5-9, 1997, vol.1, pp.234-238.

10. Wallace, R.R., T.A. Lipo, L.A. Moran, J.A. Tapia, “Design and Construction of a Permanent Magnet Axial Flux Synchronous Generator,” IEEE-IEMDC, May 18-21, 1997, MA1-4.1-MA1-4.3.

11. da Silva, E.R., Y. Murai, T.A. Lipo, L.P.B. de Oliveira, C.B. Jacobina, “Pulsed Dc-Link Current Converters - A Review,” IEEE-IAS Conference Record, Oct. 5-9,1997, vol.2, pp. 1406-1413.

12. Matsuo, T., J. Luo, E. Hoffman, T.A. Lipo, “Self Excited Variable Reluctance Generator,” IEEE-IAS Conference Record, Oct. 5-9,1997, vol.1, pp.653-660.

13. Chen, S., T.A. Lipo, “Bearing Currents and Shaft Voltages of an Induction Motor Under Hard and Soft Switching Inverter Excitation,” IEEE-IAS Conference Record, Oct. 5-9,1997, vol.1, pp.167-173.

14. Sinha, G., T.A. Lipo, “A Four Level Inverter Based Drive With A Passive Front End,” IEEE-PESC Summer Meeting, 1997, pp. 590-596.

15. Oriti, G., A.L. Julian, T.A. Lipo, “A New Space Vector Modulation Strategy for Common Mode Voltage Reduction,” IEEE-PESC, June 22-27, 1997, pp. 1541-1546.

16. Cardoso-Filho, B.J., S. Bernet, T.A. Lipo, “A New Control Strategy for the PWM Current Stiff Rectifier/Inverter with Resonant Snubbers,” Submitted to IEEE-PESC, 1997, pp. 573-579.

17. Filho, B.J.C., S. Bernet, T.A. Lipo, “Current Stiff Converter Topologies with Resonant Snubbers,” IEEE IAS Conference Record, Oct. 5-9, 1997, vol.2, pp. 1322-1329.

18. Hava, A.M., S.K. Sul, R.J. Kerkman, T.A. Lipo, “Dynamic Overmodulation Characteristics of Triangle Intersection PWM Methods,” IEEE-IAS Conference Record, Oct. 1997, vol.2, pp.1523-1528.

19. Oriti, G., A.L. Julian, T.A. Lipo, “An Inverter/Motor Drive with Common Mode Voltage Elimination,” IEEE IAS Conference Record, Oct. 5-9,1997, vol. 1, pp.587-592.

20. Hava, A.M., R.J. Kerkman, T.A. Lipo, “Simple Analytical and Graphical Tools for Carrier Based PWM Methods,” IEEE-PESC Conference Record, 1997, vol. 2, pp. 1462-1471.

21. Tidu, S., B. Pietra, J. Luo, T.A. Lipo, “Innovative Electrical Machines for Traction Applications,” World Congress on Railway Research, Florence, Italy, Nov. 1997, pp. 459-466.

22. Leonardi, F, P.J. McCleer, T.A. Lipo, “The DSPM: An AC Permanent Magnet Traction Motor with True Field Weakening,” International Conference on “All Electric Combat Vehicle,” Detroit, MI, 1997.

23. Huang, S., J. Luo, T.A. Lipo, “Analysis and Evaluation of the Transverse Flux Circumferential Current Machine,” IEEE-IAS Conference Record, Oct. 5-9,1997, vol. 1, pp. 378-384.

24. Sinha, G., T.A. Lipo, “A New Modulation Strategy for Improved DC Bus Utilization in Soft and Hard Switched Multilevel Inverters,” IECON, Nov. 1997, pp. 670-675.

25. J. Luo, S. Huang, T.A. Lipo, “Evaluation of Transverse Flux Circumferential Current Machine by The Use of Sizing Equations,” International Conference on Electrical Machines and Drives, Milwaukee WI, June 1997, pp. WB2-15.1-WB2-15.3.

26. Kim, G-T., T.A. Lipo, “DC Link Voltage Control of Reduced Switch VSI-PWM Rectifier/Inverter System,” IEEE Industrial Electronics Society IECON, Nov. 9-14, 1997, vol. 2, pp. 833-838.

27. Sinha, G., T.A. Lipo, “Rectifier Current Regulation in Four Level Drives,” IEEE IAS Annual Meeting Conference Record, Oct. 1997.

28. Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE Transactions on Industry Applications, Jan.-Feb. 1998, vol. 34, no. 1, pp. 92-97.

1998 Publications

1. Toliyat, H., M. Rahimian, T.A. Lipo, “Analysis and Simulation of Five-Phase Synchronous Reluctance Machines Including Third Harmonic of Airgap MMF,” IEEE Transactions on Industry Applications, Mar.-Apr. 1998, vol. 34, no. 2, pp. 332-339.

2. Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE Transactions on Industry Applications, Jan.-Feb. 1998, vol. 34, no. 1, pp. 92-97.

3. Chen, S., T.A. Lipo, “Circulating Type Motor Bearing Current in Inverter Drives,” IEEE - Industry Applications Magazine, Jan.-Feb. 1998, vol. 4 , iss. 1, pp. 32-38.

4. Sinha, G., T.A. Lipo, “A Four Level Rectifier-Inverter System for Drive Applications,” IEEE Industry Applications Magazine, Jan.-Feb. 1998, vol. 4 , iss. 1, pp. 66 – 74.

5. Cardoso-Filho, B.J., T.A. Lipo, “Space Vector Analysis and Modulation Issues of Passively Clamped Quasi-Resonant Inverters,” IEEE Transactions on Industry Applications, July-Aug. 1998, vol. 34, no. 4, pp. 861-869.

6. Hava, A.M., R.J. Kerkman, T.A. Lipo, “A High Performance Generalized Discontinuous PWM Algorithm,” IEEE Transactions on Industry Applications, Sept.-Oct. 1998, vol. 34, no. 5, pp. 1059-1071.

7. Chen, S., T.A. Lipo, “Bearing Currents and Shaft Voltages of an Induction Motor Under Hard and Soft Switching Inverter Excitation,” IEEE Transactions on Industry Applications, Sept.-Oct. 1998, vol. 34, no. 5, pp. 1042-1048.

8. Sng, E.K.K., A.C. Liew, T.A. Lipo, “New Observer Based DFO Scheme for Speed Sensorless Field-Oriented Drives for Low to Zero Speed Operation,” IEEE Transactions on Power Electronics, Sept. 1998, vol. 13, no. 5, pp. 959-968.

9. Munoz-Garcia, A., T.A. Lipo, “On-Line Dead Time Compensation Technique for Open-Loop PWM-VSI Drives,” IEEE-APEC Conf. Rec. February 1998. Vol. 1. pp. 95-100.

10. Julian, A.L., R. Cuzner, G. Oriti, T.A. Lipo, “Active Filtering for Common Mode Conducted EMI Reduction in Voltage Source Inverters,” IEEE-APEC Conference Record, Feb. 1998, vol. 2, pp. 934-939.

11. Manjrekar, M.D., T.A. Lipo, “A Hybrid Multilevel Inverter Topology for Drive Applications,” IEEE-APEC Conference Record, Feb. 1998, vol. 2, pp. 523-529.

12. Kim, S., S.-K. Sul, T.A. Lipo, “AC to AC Power Conversion Based on Matrix Converter Topology with Unidirectional Switches,” IEEE Applied Power Electronics Conference, Feb. 1998, pp. 301-307.

13. Brumsickle, W.E., D.M. Divan, T.A. Lipo, “Reduced Switching Stress in High-Voltage IGBT Inverters via a Three-Level Structure,” IEEE-APEC Conference Record, Feb. 1998, vol. 2, pp. 544-550.

14. John, V., B.-S. Suh, T.A. Lipo, “Fast Clamped Short Circuit Protection of IGBTs,” IEEE-APEC Conference Record, Feb.1998, vol. 2, pp. 724-730.

15. Cardoso Filho, B.J., T.A. Lipo, “A Reduced Parts Count Realization of the Resonant Snubbers for High Power Current Stiff Converters,” IEEE-APEC Conference Record, Feb. 1998, vol. 2, pp. 558-564.

16. Rockhill, A., T.A. Lipo, A.L. Julian, “High Voltage Buck Converter Topology for Common Mode Voltage Reduction,” IEEE-APEC Conference Record, Feb. 1998, vol. 2, pp. 940-943.

17. Rao, A., A.L. Julian, T.A. Lipo, “Investigation of a Modified Single Phase Inverter Topology for Reduction of Common Mode Voltage,” IEEE-PESC, June 1999, vol. 2, pp. 850-854.

18. Munoz-Garcia, A., T.A. Lipo, D.W. Novotny, “A New Induction Motor V/F Control Method Capable of High Performance Regulation at Low Speeds,” IEEE Transactions on Industry Applications, July-Aug. 1998, vol. 34, no. 4, pp. 813-821.

19. Munoz-Garcia, A., T.A. Lipo, “Dual Stator Winding Induction Machine Drive,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp. 601-608.

20. Munoz-Garcia, A., T.A. Lipo, “Complex Vector Model of the Squirrel Cage Induction Machine Including Instantaneous Rotor Bar Currents,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp. 57-64.

21. Sarlioglu, B., T.A. Lipo, “Nonlinear Modeling and Simulation of Single Phase Doubly Salient Permanent Magnet Generator,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp. 18-26.

22. Luo, J., D. Qin, T.A. Lipo, S. Huang, S.Li, “Axial Flux Circumferential Current Permanent Magnet (AFCC) Machine,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp. 144-151.

23. John, V., B.-S. Suh, T.A. Lipo, “High Performance Active Gate Drive for High Power IGBTs,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 2, pp. 1519-1529.

24. Zhong, E., T.A. Lipo, S. Rossiter, “Transient Modeling and Analysis of Motor Terminal Voltage on PWM Inverter-Fed AC Motor Drives,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp. 773-780.

25. Chen, S., T.A. Lipo, “Induction Motor Bearing Currents and Shaft Voltages Caused by PWM Inverters,” CAST Conference of Young Scientists, Beijing, China, Aug. 1998.

26. Manjrekar, M.D., T.A. Lipo, “A Generalized Structure of Multilevel Power Converter,” PEDES, Perth, Australia, Nov.-Dec. 1998, vol. 1, pp. 62-67.

27. Suh, B.-S., G. Sinha, M.D. Manjrekar, T.A. Lipo, “Multilevel Power Conversion - An Overview of Topologies and Modulation Strategies,” Optimization of Electrical & Electronic Equipment, 1998, vol. 2, pp. AD11-AD24.

28. Manjrekar, M.D., T.A. Lipo, S.-G. Chang, K.-S. Kim, “Flux Tracking Methods for Direct Field Orientation,” ICEM Conference Record, 1998, vol. 2, pp. 1022-1029.

29. Matsuo, T., S. Bernet, R.S. Colby, T.A. Lipo, “Mathematics and Computers in Simulation,” Mathematics and Computers in Simulation 46., 1998, pp. 175-195.

30. Ledezma, E., A. Munoz-Garcia, T.A. Lipo, “A New Dual Three-Phase Drive System with a Reduced Switch Count,” IEEE-IAS Conference Record, St. Louis, MO, Oct. 1998, vol. 1, pp. 781-788.

31. Al-Saffar, M.A., E.-C. Nho, T.A. Lipo, “Controlled Shunt Capacitor Self-Excited Induction Generator,” IEEE IAS Annual Meeting Conference Record, St. Louis, Oct.1998, pp. 1486-1490.

32. Wallace, R.R., V.D.Fierro, L.A. Moran, T.A. Lipo, “Use of a Conductor Screen to Magnetize NdFeB Magnets,” IEEE 7th Joint MMM-Intermag Conference, San Francisco, CA, Jan. 6-9, 1998.

33. De Broe, A. M., A.L. Julian, T.A. Lipo, “Neutral-to-Ground Voltage Minimization in a PWM-Rectifier/Inverter Configuration,” Electric Machines and Power Systems, 1998, vol. 26, no. 7, pp. 741-748.

34. Hava, A., R.J. Kerkman, T.A. Lipo, “Carrier-Based PWM-VSI Overmodulation Strategies: Analysis, Comparison and Design,” IEEE Transactions on Power Electronics, July 1998, vol. 13, no. 4, pp. 674-689.

1999 Publications

1. Lipo, T., G. Oriti, A. Julian, “Elimination of Common Mode Voltage in Three-Phase Sinusoidal Power Converters,” IEEE Transactions on Power Electronics, Sept. 1999, vol. 14, no. 5, pp. 982-989.

2. Hava, A.M., S.K. Sul, R.J. Kerkman, T.A. Lipo, “Dynamic Overmodulation Characteristics of Triangle Intersection PWM Methods,” IEEE Transactions on Industry Applications, July-Aug. 1999, vol. 35, no. 4, pp. 896-907.

3. Hava, A.M., R.J. Kerkman, T.A. Lipo, “Simple Analytical and Graphical Tools for Carrier Based PWM Methods,” IEEE Transactions on Power Electronics, Jan.1999, vol. 14, no. 6, pp. 49-61.

4. Munoz-Garcia, A., T.A. Lipo, “On-Line Dead Time Compensation Technique for Open-Loop PWM-VSI Drives,” IEEE Transactions on Power Electronics, July 1999, vol. 14, no. 4, pp. 683-689.

5. John, V., B.-S. Suh, T.A. Lipo, “Fast Clamped Short Circuit Protection of IGBTs,” IEEE-IAS Transactions on Industry Applications, Mar.-Apr. 1999, vol. 35, no. 2, pp. 477-486.

6. Munoz-Garcia, A., T.A. Lipo, “Complex Vector Model of the Squirrel Cage Induction Machine Including Instantaneous Rotor Bar Currents,” IEEE Transactions on Industry Applications, Nov.-Dec. 1999, vol. 35, no. 6, pp. 1332-1340.

7. John, V., B.-S. Suh, T.A. Lipo, “High Performance Active Gate Drive for High Power IGBTs,” IEEE-IAS Transactions on Industry Applications, Sept.-Oct. 1999, vol. 35, no. 5, pp. 1108-1117.

8. Toba, A., T.A. Lipo, “Generic Torque-Maximizing Design Methodology of Permanent Magnet Vernier Machine,” IEEE-IEMDC Conference Record, Seattle, WA, May 1999, pp. 522-524.

9. Sarlioglu, B., T.A. Lipo, “Assessment of Power Generation Capability of Doubly-Salient PM Generator,” IEEE-IEMDC Conference Record, Seattle, WA. May 1999, pp. 549-552.

10. Luo, X., T.A. Lipo, “A Synchronous/Permanent Magnet Hybrid AC Machine,” IEEE-IEMDC Conference Record, Seattle, WA. May 1999, pp. 19-21.

11. Lipo, T.A., “Electric Drives Technology - Part Way to Where?,” IEEE-IEMDC Conference Record, Seattle, WA. May 1999,pp. 1-3.

12. Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Performance Improvement of Half Controlled Three Phase PWM Boost Rectifier,” IEEE-PESC Conference Record , Charleston, SC, June-July 1999, vol. 1, pp. 319-324.

13. Lund, R., M.D. Manjrekar, P. Steimer, T.A. Lipo, “Control Strategies for a Hybrid Seven-Level Inverter,” EPE Conference Record, Lausanne, Switzerland, Sept. 1999, CD-ROM.

14. Lyra, R.O.C., B.J. Cardoso-Filho, V. John, T.A. Lipo, “Co-Axial Current Transformer for Test and Characterization of High Power Semiconductor Devices Under Hard and Soft-Switching,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 2009-2016.

15. John, V., B.-S. Suh, T.A. Lipo, “An Active Gate Drive with Three-Stage Control and Fast Protection for High Power IGBTs,” EPE Conference Record, Lausanne, Switzerland, Sept. 1999, CD-ROM.

16. Toba, A., T.A. Lipo, “Novel Dual-Excitation Permanent Magnet Vernier Machine,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 4, pp. 2539-2544.

17. Manjrekar, M.D., T.A. Lipo, “An Auxillary Zero State Synthesizer to Reduce Common Mode Voltage in Three-Phase Inverters,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 1, pp. 54-59.

18. Manjrekar, M.D., P. Steimer, T.A. Lipo, “Hybrid Multilevel Power Conversion System: A Competitive Solution for High Power Applications,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 1520-1527.

19. Qin, D., R. Qu, T.A. Lipo, “A Novel Electric Machine Employing Torque Magnification and Flux Concentration Effects,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 1, pp. 132-139.

20. Osama, M., T.A. Lipo, “Experimental and Finite Element Analysis of an Electronic Pole-Change Drive,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 2, pp. 914-921.

21. Consoli, A., F. Gennaro, V. John, T.A. Lipo, “Effects of the Internal Layout on the Performance of IGBT Power Modules,” COBEP, Foz do Iguassu, Brazil, Sept.1999.

22. Garrigan, N.R., W.L. Soong, C.M. Stephans, A. Storace, T.A. Lipo, “Radial Force Characteristics of a Switched Reluctance Machine,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol.4, pp. 2250-2258.

23. Cardoso-Filho, B.J., T.A. Lipo, “Application of MTO-thyristors in Current Stiff Converters with Resonant Snubbers,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 3, pp. 1871-1878.

24. Cardoso-Filho, B.J., T.A. Lipo, “High Power Converters with Active Snubbers for Variable Speed Drive Applications,” COBEP, Foz do Iguassu, Brazil, Sept.1999.

25. Nho, E.-C., I.-D. Kim, T.A. Lipo, “A New Boost Type Rectifier for a DC Power Supply with Frequent Output Short Circuit,” IEEE-IAS Conference Record, Phoenix, AZ, Oct. 1999, vol. 2, pp. 1165-1172.

26. Rao, A., T.A. Lipo, A. Julian, “A Modified Single Phase Inverter Topology with Active Common Mode Voltage Rejection,” IEEE-PESC Conference Record, Charleston, SC, June 1999, vol. 2, pp. 850-854.

27. Osama, M., T.A. Lipo, “A Magnetic Relief Scheme for Four Pole Induction Motors,” Proceedings of Conference on Electrical Machines, Converters and Systems. Lisbon, Portugal, Sept. 14-16, 1999, vol.1, pp. I-15 - I-21.

28. Jiang, Q., T.A. Lipo, “Switching Angles and DC Link Voltages Optimization for Multilevel Cascade Inverters,” Electric Machines and Power Systems, July 2000, vol. 28, no. 7, pp. 605-612.

29. Suh, B-S., Y-H. Lee, D.-S. Hyun, T.A. Lipo, “A New Multilevel Inverter Topology with a Hybrid Approach,” European Power Electronics Conference, Lausanne Switzerland., Sept. 1999.

30. Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Complementary Half Controlled Three Phase PWM Boost Rectifier for Multi-DC-Link Applications,” IEEE Applied Power Electronics Conference, New Orleans, Feb. 2000.

31. Huang, S., J. Luo, F. Leonardi, T.A. Lipo, “A Comparison of Power Density for Axial Flux Machines Based on General Purpose Sizing Equations,” IEEE Transactions on Energy Conversion, June 1999, vol. 14, no. 2, pp. 185-192.

32. Manjrekar, M.D., T.A. Lipo, S-G Chang, K-S Kim, “Flux Tracking Methods for Direct Field Orientation,” Electrical Machines and Power Systems, 1999, vol. 27, pp. 905-920.

2001 Publications

1. Cardoso-Filho, B.J., T.A. Lipo, “Application of MTO-thyristors in Current Stiff Converters with Resonant Snubbers,” IEEE Transactions on Industry Applications, Mar.-Apr. 2001, vol. 37, iss. 2, pp. 566-573.
2. Welchko, B.A., T.A. Lipo, “A Novel Variable Frequency Three Phase Induction Motor Drive System Using Only Three Controlled Switches,” IEEE Transactions on Industry Applications, Nov.-Dec. 2001, vol. 37, iss. 6, pp. 1739-1745.
3. Ledezma, E., B. McGrath, A.R. Munoz-Garcia, T.A. Lipo, “Dual AC-Drive System with a Reduced Switch Count,” IEEE Transactions on Industry Applications, Sept.-Oct. 2001, vol. 37, iss. 5, pp. 1325-1333.
4. Stankovic, A.V., T.A. Lipo, “A Novel Control Method for Input Output Harmonic Elimination of the PWM Boost Type Rectifier Under Unbalanced Operating Conditions,” IEEE Transactions on Power Electronics, Sept. 2001, vol. 16, no. 5, pp. 603-611.
5. McGrath, B.P., D.G. Holmes, T.A. Lipo, “Optimised Space Vector Switching Sequences for Mutilevel Inverters,” IEEE Applied Power Electronics Conference (APEC) 2001, Anaheim, CA, Mar. 4-8, 2001, vol. 2, pp 1123-9
6. Suh, Y., P.G. Albano, V. Tijeras, T.A. Lipo, “Unity Power Factor Control of a Three-pole PWM AC/DC Converter Under Single-phase Input,” Submitted to CPES Annual Meeting, Blacksburg, VA, Apr. 22-25, 2001.
7. Huang, S., M. Aydin, T.A. Lipo, “Electromagnetic Vibration and Noise Assessment for Surface Mounted PM Machines,” Power Engineering Society Summer Meeting conference proceedings, 2001, vol. 3, pp. 1417-1426.
8. Aydin, M., S. Huang, T.A. Lipo, “Optimum Design and 3D Finite Element Analysis of Non-slotted and Slotted Internal Rotor Type Axial Flux PM Disc Machines,” Power Engineering Society Summer Meeting conference proceedings, 2001, vol. 3, pp. 1409-1416.
9. Huang, S., M. Aydin, T.A. Lipo, “Low Noise and Smooth Torque Permanent Magnet Propulsion Motors: Comparison of Non-slotted and Slotted Radial and Axial Flux Topologies,” Submitted to International Aegean Conference of Electrical Machines and Power Electronics, 2001, pp.1-8.
10. Aydin, M., S. Huang, T.A. Lipo, “Design and 3D Electromagnetic Field Analysis of Non-slotted and Slotted TORUS Type Axial Flux Surface Mounted Permanent Magnet Disc Machines,” International Electrical Machine and Drive Conference Proceedings, 2001, pp 645-651.
11. Stankovic, A.V., T.A. Lipo, “A Generalized Control Method for Input-Output Harmonic Elimination for the PWM Boost Rectifier Under Simultaneous Unbalanced Input Voltages and Input Impedances,” PESC 2001 conference proceedings, 2001, vol. 3, pp. 1309-1314.
12. Chomat, M., T.A. Lipo, “Adjustable-Speed Drive with Single-Phase Induction Machine for HVAC Applications,” PESC 2001 conference proceedings, 2001, vol. 3, pp. 1446-1451.
13. Panda, D., E.L. Benedict, G. Venkataramanan, T.A. Lipo, “A Novel Control Strategy For the Rotor Side Control of a Doubly Fed Induction Machine,” IEEE IAS Chicago, Oct. 2001, vol. 3, pp. 1695-1702.
14. Moreira, A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “Modeling and Evaluation of dv/dt Filters for AC Drives with High Switching Speed,” 9th European Conference on Power Electronics and Applications, Graz, Austria, Aug 27-29, 2001, CD-ROM.
15. Moreira, A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “High Frequency Modeling for Cable and Induction Motor Over-Voltage Studies in Long Cable Drives,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 1787-1794.
16. Welchko, B.A., T.A. Lipo, “Model Reference Current Control of a Unipolar Induction Motor Drive,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 1807-1813.
17. Luo, J., S. Huang, S. Chen, T.A. Lipo, “Design and Experiments of a Novel Axial Flux Circumferential Current Permanent Magnet (AFCC) Machine with Radial Airgap,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, vol. 3, pp. 1989-1996.
18. Kikuchi, J., T.A. Lipo, “Three Phase PWM Boost-Buck Rectifiers with Power Regenerating Capability,” IEEE IAS Chicago, IL, Sep 30 - Oct 4, 2001. pp. 308-315. IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 308-315.
19. Aydin, M., S. Huang, T.A. Lipo, “Torque Quality and Comparison of Internal and External Rotor Axial Flux Surface-Magnet Disc Machines,” Industrial Electronics Society, 2001. IECON '01. The 27th Annual Conference of the IEEE, Volume 2, 29 Nov.-2 Dec. 2001 Page(s):1428 - 1434 vol.2. Industrial Electronics, IEEE Transactions on Volume 53, Issue 3, June 2006 Page(s):822 - 830
20. Chomat, M., T.A. Lipo, “Adjustable-Speed Single-Phase IM Drive with Reduced Number of Switches,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, vol. 1, pp. 1800-1806.
21. Park, S-J., J.-W. Ahn, M.-H. Lee, T.A. Lipo, “Novel Encoder for SRM Drive with High Resolution Switching Angle Control,” 2001 IEEE International Symposium on Industrial Electronics (ISIE 2001), Pusan South Korea, vol. 3, pp. 1781-1785.
22. Tapia, J.A., F. Leonardi, T.A. Lipo, “CPPM: A Synchronous Permanent Magnet Machine with Field Weakening,” International Agean Conf. On Electrical Machines and Power Electronics, Kusadasi, Turkey, June 2001.
23. Tapia, J.A., F. Leonardi, T.A. Lipo, “Consequent Pole Permanent Magnet Machine with Field Weakening Capability,” International Electrical Machines and Drives Conf. (IEMDC), Cambridge, MA, June 17-20, 2001, pp. 126-131.
24. McGrath, B.P., M. Manjrekar, G. Holmes, T.A. Lipo, “An Improved Modulation Strategy for a Hybrid Multilevel Inverter,” IEEE Applied Power Electronics Conference, Mar. 2001.
25. Yao, J., J. Krase, T.A. Lipo, “Design Considerations for Single Phase Induction Motor Packaged Drives,” CPES Annual Meeting, Apr. 2001, CDROM.
26. Yao, J., T.A. Lipo, “A Novel Soft-Switching Inverter with ZVS-ZCS Features,” IEEE Power Electronics Specialists Conference, Vancouver, June 17-21, 2001, CDROM, vol. 2, pp. 1141-1146.
27. Sarlioglu, B., T.A. Lipo, “Nonlinear Analysis and Experimental Results of Doubly Salient PM Generator,” IEEE Aegean Conference on Electrical Machines and Power (ACEMP), Kusadasi, Turkey, 2001.
28. Huang, S., M. Aydin, T.A. Lipo, “TORUS Concept Machines: Pre-Prototyping Assessment for Two Major Topologies,” IEEE IAS Annual Meeting Conference Record , Chicago, IL, Oct. 2001, pp. 1619-1625.
29. Wei, L., T.A. Lipo, “A Novel Matrix Converter Topology with Simple Commutation”, IEEE IAS Annual Meeting Conference Record, Chicago, IL, Oct. 2001, vol. 3, pp. 1749-1754.
30. Lyra, R., T.A. Lipo, “Torque Density Improvement in a Six-Phase Induction Motor with Third Harmonic Current Injection,” IEEE IAS Annual Meeting Conference Record, Chicago, IL, Oct. 2001, vol. 3, pp.1779-1786.

2001 Publications

1. Cardoso-Filho, B.J., T.A. Lipo, “Application of MTO-thyristors in Current Stiff Converters with Resonant Snubbers,” IEEE Transactions on Industry Applications, Mar.-Apr. 2001, vol. 37, iss. 2, pp. 566-573.
2. Welchko, B.A., T.A. Lipo, “A Novel Variable Frequency Three Phase Induction Motor Drive System Using Only Three Controlled Switches,” IEEE Transactions on Industry Applications, Nov.-Dec. 2001, vol. 37, iss. 6, pp. 1739-1745.
3. Ledezma, E., B. McGrath, A.R. Munoz-Garcia, T.A. Lipo, “Dual AC-Drive System with a Reduced Switch Count,” IEEE Transactions on Industry Applications, Sept.-Oct. 2001, vol. 37, iss. 5, pp. 1325-1333.
4. Stankovic, A.V., T.A. Lipo, “A Novel Control Method for Input Output Harmonic Elimination of the PWM Boost Type Rectifier Under Unbalanced Operating Conditions,” IEEE Transactions on Power Electronics, Sept. 2001, vol. 16, no. 5, pp. 603-611.
5. McGrath, B.P., D.G. Holmes, T.A. Lipo, “Optimised Space Vector Switching Sequences for Mutilevel Inverters,” IEEE Applied Power Electronics Conference (APEC) 2001, Anaheim, CA, Mar. 4-8, 2001, vol. 2, pp 1123-9
6. Suh, Y., P.G. Albano, V. Tijeras, T.A. Lipo, “Unity Power Factor Control of a Three-pole PWM AC/DC Converter Under Single-phase Input,” Submitted to CPES Annual Meeting, Blacksburg, VA, Apr. 22-25, 2001.
7. Huang, S., M. Aydin, T.A. Lipo, “Electromagnetic Vibration and Noise Assessment for Surface Mounted PM Machines,” Power Engineering Society Summer Meeting conference proceedings, 2001, vol. 3, pp. 1417-1426.
8. Aydin, M., S. Huang, T.A. Lipo, “Optimum Design and 3D Finite Element Analysis of Non-slotted and Slotted Internal Rotor Type Axial Flux PM Disc Machines,” Power Engineering Society Summer Meeting conference proceedings, 2001, vol. 3, pp. 1409-1416.
9. Huang, S., M. Aydin, T.A. Lipo, “Low Noise and Smooth Torque Permanent Magnet Propulsion Motors: Comparison of Non-slotted and Slotted Radial and Axial Flux Topologies,” Submitted to International Aegean Conference of Electrical Machines and Power Electronics, 2001, pp.1-8.
10. Aydin, M., S. Huang, T.A. Lipo, “Design and 3D Electromagnetic Field Analysis of Non-slotted and Slotted TORUS Type Axial Flux Surface Mounted Permanent Magnet Disc Machines,” International Electrical Machine and Drive Conference Proceedings, 2001, pp 645-651.
11. Stankovic, A.V., T.A. Lipo, “A Generalized Control Method for Input-Output Harmonic Elimination for the PWM Boost Rectifier Under Simultaneous Unbalanced Input Voltages and Input Impedances,” PESC 2001 conference proceedings, 2001, vol. 3, pp. 1309-1314.
12. Chomat, M., T.A. Lipo, “Adjustable-Speed Drive with Single-Phase Induction Machine for HVAC Applications,” PESC 2001 conference proceedings, 2001, vol. 3, pp. 1446-1451.
13. Panda, D., E.L. Benedict, G. Venkataramanan, T.A. Lipo, “A Novel Control Strategy For the Rotor Side Control of a Doubly Fed Induction Machine,” IEEE IAS Chicago, Oct. 2001, vol. 3, pp. 1695-1702.
14. Moreira, A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “Modeling and Evaluation of dv/dt Filters for AC Drives with High Switching Speed,” 9th European Conference on Power Electronics and Applications, Graz, Austria, Aug 27-29, 2001, CD-ROM.
15. Moreira, A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “High Frequency Modeling for Cable and Induction Motor Over-Voltage Studies in Long Cable Drives,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 1787-1794.
16. Welchko, B.A., T.A. Lipo, “Model Reference Current Control of a Unipolar Induction Motor Drive,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 1807-1813.
17. Luo, J., S. Huang, S. Chen, T.A. Lipo, “Design and Experiments of a Novel Axial Flux Circumferential Current Permanent Magnet (AFCC) Machine with Radial Airgap,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, vol. 3, pp. 1989-1996.
18. Kikuchi, J., T.A. Lipo, “Three Phase PWM Boost-Buck Rectifiers with Power Regenerating Capability,” IEEE IAS Chicago, IL, Sep 30 - Oct 4, 2001. pp. 308-315. IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, pp. 308-315.
19. Aydin, M., S. Huang, T.A. Lipo, “Torque Quality and Comparison of Internal and External Rotor Axial Flux Surface-Magnet Disc Machines,” Industrial Electronics Society, 2001. IECON '01. The 27th Annual Conference of the IEEE, Volume 2, 29 Nov.-2 Dec. 2001 Page(s):1428 - 1434 vol.2. Industrial Electronics, IEEE Transactions on Volume 53, Issue 3, June 2006 Page(s):822 - 830
20. Chomat, M., T.A. Lipo, “Adjustable-Speed Single-Phase IM Drive with Reduced Number of Switches,” IEEE Industrial Application Society 36th Annual Meeting, Chicago, IL, Sept. 30-Oct 5, 2001, vol. 1, pp. 1800-1806.
21. Park, S-J., J.-W. Ahn, M.-H. Lee, T.A. Lipo, “Novel Encoder for SRM Drive with High Resolution Switching Angle Control,” 2001 IEEE International Symposium on Industrial Electronics (ISIE 2001), Pusan South Korea, vol. 3, pp. 1781-1785.
22. Tapia, J.A., F. Leonardi, T.A. Lipo, “CPPM: A Synchronous Permanent Magnet Machine with Field Weakening,” International Agean Conf. On Electrical Machines and Power Electronics, Kusadasi, Turkey, June 2001.
23. Tapia, J.A., F. Leonardi, T.A. Lipo, “Consequent Pole Permanent Magnet Machine with Field Weakening Capability,” International Electrical Machines and Drives Conf. (IEMDC), Cambridge, MA, June 17-20, 2001, pp. 126-131.
24. McGrath, B.P., M. Manjrekar, G. Holmes, T.A. Lipo, “An Improved Modulation Strategy for a Hybrid Multilevel Inverter,” IEEE Applied Power Electronics Conference, Mar. 2001.
25. Yao, J., J. Krase, T.A. Lipo, “Design Considerations for Single Phase Induction Motor Packaged Drives,” CPES Annual Meeting, Apr. 2001, CDROM.
26. Yao, J., T.A. Lipo, “A Novel Soft-Switching Inverter with ZVS-ZCS Features,” IEEE Power Electronics Specialists Conference, Vancouver, June 17-21, 2001, CDROM, vol. 2, pp. 1141-1146.
27. Sarlioglu, B., T.A. Lipo, “Nonlinear Analysis and Experimental Results of Doubly Salient PM Generator,” IEEE Aegean Conference on Electrical Machines and Power (ACEMP), Kusadasi, Turkey, 2001.
28. Huang, S., M. Aydin, T.A. Lipo, “TORUS Concept Machines: Pre-Prototyping Assessment for Two Major Topologies,” IEEE IAS Annual Meeting Conference Record , Chicago, IL, Oct. 2001, pp. 1619-1625.
29. Wei, L., T.A. Lipo, “A Novel Matrix Converter Topology with Simple Commutation”, IEEE IAS Annual Meeting Conference Record, Chicago, IL, Oct. 2001, vol. 3, pp. 1749-1754.
30. Lyra, R., T.A. Lipo, “Torque Density Improvement in a Six-Phase Induction Motor with Third Harmonic Current Injection,” IEEE IAS Annual Meeting Conference Record, Chicago, IL, Oct. 2001, vol. 3, pp.1779-1786.

2002 Publications

1. Moreira, A.F., T.A. Lipo, G. Venkataramanan, S. Bernet, “High Frequency Modeling for Cable and Induction Motor Over-Voltage Studies in Long Cable Drives,” IEEE Transactions on Industry Applications, Sept.-Oct. 2002, vol. 38, iss. 5, pp. 1297 -1306.
2. Kikuchi, J., T.A. Lipo, “Three Phase PWM Boost-Buck Rectifiers with Power Regenerating Capability,” IEEE Transactions on Industry Applications, Sept.-Oct. 2002, vol. 38, iss. 5, pp. 1361-1369.
3. Chomat, M., T.A. Lipo, “Adjustable-Speed Single-Phase IM Drive with Reduced Number of Switches,” IEEE Transactions on Industry Applications, May-June, 2003, vol.39, iss. 3, pp.819-825.

4. Consoli, A., G. Scarcella, A. Testa, T.A. Lipo, “Air-Gap Flux Position Estimation of Inaccessible Neutral Induction Machines by Zero-Sequence Voltage”, Electric Power Components and Systems, 2002, vol. 30, no. 1, pp. 77-88.

5. Lipo, T.A., A. Consoli, G. Scarcella, A. Testa, “Air-Gap Flux Position Estimation of Inaccessible Neutral Induction Machines by Zero-Sequence Voltage,” Electric Power Components and Systems, vol. 30, no. 1, 2002. pp. 77-88.
6. Drevensek, D., D. Zarko, T.A. Lipo, “A Study of Sensorless Control of Induction Motor at Zero Speed Utilizing High Frequency Voltage Injection,” EPE-PEMC, 2002, Dubrovnik and Cavtat.
7. Tapia, J.A., F. Leonardi, T.A. Lipo, “Consequent Pole Permanent Magnet Machine with Field Weakening Capability,” IEEE Transactions on Industry Applications, Nov.-Dec. 2003, vol. 39, iss. 6, pp. 1704-1709.
8. Lyra, R., T.A. Lipo, “Torque Density Improvement in a Six-Phase Induction Motor with Third Harmonic Current Injection,” IEEE Transactions on Industry Applications, Sept.-Oct. vol. 38, iss. 5, pp. 1351-1360.
9. Wei, L., Lipo, T.A., Chan, H, “Matrix Converter Topologies With Reduced Number of Switches,” PESC 2002, June 23-27, 2002, vol. 1, pp 57-63.
10. Suh, Y., V. Tijeras, T. A. Lipo, “A Control Method in dq Synchronous Frame for PWM Boost Rectifier under Generalized Unbalanced Operating Conditions,” PESC 2002, June, 23-27 2002, pp 1425-1430.
11. Welchko, B., Correa, M., Lipo, T.A., “A Three-Level MOSFET Inverter for Low Power Drives,” IECON 2002, Sevilla, Spain, Nov. 5-8, 2002, vol.2, pp.1276-1272.
12. Aydin, M., S. Huang, T.A. Lipo, “A New Axial Flux Surface Mounted Permanent Magnet Machine Capable of Field Control,” IEEE IAS Annual Meeting, Pittsburgh, PA, Oct. 11-19, 2002, vol. 2, pp.1250 -1257.
13. Kieferndorf, F. D. , M.Foerster, T.A. Lipo, “Reduction of DC Bus Capacitor Ripple Current with PAM/PWM Converter,” IEEE - IAS Conference Record, 2002, vol. 4, pp.2371 -2377.
14. Suh, Y., V. Tijeras, T.A. Lipo, “A Nonlinear Control of the Instantaneous Power in dq Synchronous Frame for PWM AC/DC Converter under Generalized Unbalanced Operating Conditions,” IEEE IAS Annual Meeting, Pittsburgh, PA, Oct. 11-19, 2002, vol. 2, pp. 1189-1196.
15. Qu, R., T.A.Lipo, “Dual-Rotor, Radial-Flux, Toroidally-Wound, Permanent-Magnet Machines,” IEEE IAS Annual Meeting, Pittsburgh, PA, Oct. 11-19, 2002, vol. 2, pp. 1281-1288.
16. Qu, R., T.A.Lipo, “Analysis and Modeling of Airgap & Zigzag Leakage Fluxes in a Surface-Mounted-PM Machine,” In Proc. of IEEE 37th IAS Annual Meeting, Pittsburgh, PA, Oct. 13-18,2002, pp.2507-2513.
17. Tapia, J.A., F. Leonardi, T.A. Lipo, “A Design Procedure for a PM Machine with Extended Field Weakening Capability,” In Proc. of IEEE 37th IAS Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002, vol.3, pp. 1928-1935.
18. Loh, P.C., D.G. Holmes, Y. Fukuta, T.A. Lipo, “Reduced Common Mode Carrier-Based Modulation Strategies for Cascaded Multilevel Inverters,” In Proc. of IEEE 37th IAS Annual Meeting, Pittsburgh, PA, Oct. 13-18, 2002, vol. 3, pp.2002-2009.
19. Loh, P.C., G.H. Bode, D.G. Holmes, T.A. Lipo, “A Time-Based Double Band Hysteresis Current Regulation Strategy for Single-Phase Multilevel Inverters,” In Proc. of IEEE 37th IAS Annual Meeting, Pittsburgh, PA, Oct, 13-18, 2002, vol. 3, pp.1994-2001.
20. Suh, Y-S., V. Tijeras, T.A. Lipo, “Unity Power Factor Control of a Three-Pole PWM AC/DC Converter Under Single-phase Input,” IEEE Power Electronics Specialists Conference, June 2002 (in CD ROM).
21. Drevensek, D., D. Zarko, T.A. Lipo, “A Study of Sensorless Control of Induction Motor at Zero Speed Utilizing High Frequency Voltage Injection,” EPE Power Electronics and Motion Control Conference, Dubrovnik Croatia, Sept. 2002, in CD ROM.
22. Qu, R., J. Luo, S. Huang, T.A. Lipo, “Experimental Evaluation of a Two-Phase Axial Flux Circumferential Current (AFCC) Permanent Magnet Machine,” EPE Power Electronics and Motion Control Conference, Dubrovnik Croatia, Sept. 2002, in CD ROM.
23. Huang, S., M. Aydin, T.A. Lipo, “A Direct Approach to Electrical Machine Performance Evaluation: Torque Density Assessment and Sizing Optimization,” Interenational Conf. On Electrical Machines (ICEM), Belguim, Sept. 2002, in CD ROM.
24. Lyra, R., T. A. Lipo, “Torque Density Improvement in a Six-phase Induction Motor with Third Harmonic Current Injection,” IEEE Transactions on Industry Applications, Sept.-Oct. 2002, vol. 38, no. 5, pp 1351-1360.

2003 Publications

1. Alan, I., Lipo, T.A., “Induction Machine Based Flywheel Energy Storage,” IEEE Transactions on Aerospace and Electronic Systems, Jan 2003, vol. 39 iss. 1, pp.151 -163.
2. Qu, R., T.A.Lipo, “Dual-Rotor, Radial-Flux, Toroidally-Wound, Permanent-Magnet Machines,” IEEE Transactions on Industry Applications, Nov.-Dec. 2003, vol.39, iss.6, pp.1665-1673.
3. Loh, P.C., G.H. Bode, D.G. Holmes, T.A. Lipo, “A Time-Based Double Band Hysteresis Current Regulation Strategy for Single-Phase Multilevel Inverters,” IEEE Transactions on Industry Applications, vol. 39 , iss. 3 , May-June 2003, pp. 883–892.
4. Loh, P.C., D.G. Holmes, Y. Fukuta, T.A. Lipo, “A Reduced Common Mode Hysteresis Current Regulation Strategy for Multilevel Inverters,” APEC 2003 Conference, Miami Beach, FL, Feb. 9-13, 2003, vol.1, pp 576 – 582.
5. Welchko, B.A., T.A. Lipo, T.M. Jahns, S.E. Schulz, “Fault Tolerant Three-Phase AC Motor Drive Topologies; A Comparison of Features, Cost, and Limitations,” IEEE International Electric Machines and Drives Conference (IEMDC), Madison, WI, June 1-4, 2003, vol.1, pp.539-546.
6. Qu, R., T.A. Lipo, “General Closed-form Analytical Expressions of Air-gap Inductances for Surface-mounted Permanent Magnet and Induction Machines,” IEEE International Electric Machines and Drives Conference (IEMDC), Madison, WI, June 1-4, 2003, vol.1, pp.443-448.
7. Tapia, J. A., M. Aydin, S. Huang, T. A. Lipo, “Sizing Equation Analysis for Field Controlled PM Machines: A Unified Approach,” IEEE International Electric Machines and Drives Conference (IEMDC), Madison, WI, June 1-4, 2003, vol.2, pp.1111-1116.
8. Wei, L., Y. Matsushita, T.A. Lipo, “Investigation of Dual-bridge Matrix Converter Operation under Unbalanced Source Voltages,” IEEE Power Electronics Specialists Conference (PESC), Acapulco, Mexico , June 15-19, 2003, vol.3, pp.1293-1298.
9. Wei, L. T.A. Lipo, H. Chan, “Robust Voltage Commutation of Conventional Matrix Converter,” IEEE Power Electronics Specialists Conference (PESC), Acapulco, Mexico, June 15-19, 2003, pp.717-722.
10. Stumberger, G., D.Zarko, M. T. Aydemir, T.A. Lipo, “Design of a Linear Bulk Superconductor Magnet Synchronous Motor for Electromagnetic Aircraft Launch Systems,” IEEE International Electric Machines and Drives Conference (IEMDC), Madison, WI, June 1-4, 2003, vol.1, pp.494-500., IEEE Transactions on Applied Superconductivity, Mar. 2004, vol.14, no. 1, pp. 54-62.
11. Aydin, M., S. Huang, T.A. Lipo, “Performance Evaluation of An Axial Flux Consequent Pole PM Motor Using Finite Element Analysis,” IEEE International Electric Machines and Drives Conference (IEMDC), Madison, WI, June 1-4, 2003, vol.3, pp.1682-1687.
12. Qu, R., M.Aydin, T.A.Lipo, “Performance Comparison of Dual-Rotor Radial-Flux and Axial-Flux Permanent-Magnet BLDC Machines,” IEEE International Electric Machines and Drives Conference (IEMDC), June 1-4, 2003, Madison, WI, vol.3, pp.1948-1954.
13. Sung, J.W., C.W. Lee, J.C.Yang, D.U. Kim, G.S. Kim, T.A. Lipo, C.Y. Won, S.Choi, “Sensorless Control for Linear Compressors,” International Conference on Mechatronics and Information Technology (ICMIT) Dec. 4-6, 2003, Jecheon, Korea.
14. Kieferndorf, F., M. Forster, G.Venkataramanan, T.A. Lipo, “Current Stiff Rectifiers with Reverse Blocking IGBTs and IGBTs with Series Diodes,” EPE 2003 Conference, Toulouse, France , Sept.2-4, 2003.
15. Aydin, M., R. Qu, T.A. Lipo, “Cogging Torque Minimization Technique for Multiple-Rotor, Axial-Flux, Surface-Mounted-PM Motors: Alternating Magnet Pole-Arcs in Facing Rotors,” IAS 2003 Annual Conference, Salt Lake City, Utah, Oct. 12-16, 2003, vol.1, pp.555-561.
16. Moreira, A.F., P.M. Santos, T.A. Lipo, G. Venkataramanan, “Filter Networks for Long Cable Drives and Their Influence on Motor Voltage Distribution and Common-Mode Currents,” Annual Conference of the IEEE Industrial Electronics Society (IECON) 2003, Roanoke, Virginia, Nov. 2-6, 2003, pp.2917-2922.
17. Yao, J., J. Krase, T.A. Lipo, “Design Considerations for Motor-controller Integration of a Single Phase Induction Motor Packaged Drive,” IEEE International Electric Machines and Drives Conference (IEMDC), Madison, WI, June 2-3, 2003, pp.1239-1244.
18. Qu, R. T.A. Lipo, “Design and Optimization of Dual-Rotor, Radial-Flux, Toroidally-Wound, Permanent-Magnet Machines,” IEEE Industry Applications Society Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, vol.2, pp.1397-1404.
19. Wei, L., T.A. Lipo, “Investigation of 9-switch Dual-bridge Matrix Converter Operating under Low Output Power Factor,” IEEE Industry Applications Society Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, vol.1, pp.176-181.
20. Wei, L., Y. Matsushita, T.A. Lipo, “A Compensation Method for Dual-bridge Matrix Converters Operating Under Distorted Source Voltages,” Annual Conference of the IEEE Industrial Electronics Society (IECON) 2003, Roanoke, Virginia, Nov. 2-6, 2003, pp.2028-2084.
21. Nedic, V., T.A. Lipo, “Low-cost Current-Fed PMSM Drive System with Sinusoidal Input Currents,” IEEE Industry Applications Society Annual Meeting, Salt Lake City, UT, Oct. 12-16, 2003, vol.2, pp.917-924. IEEE Transactions on Industry Applications, May/June 2006.
22. Panda, D., T. A. Lipo, “Reduced Switch Count Double Converter Fed Wound Rotor Induction Machine Drive for Wind Energy Application,” Electric Machines and Drives Conference 2003. IEMDC'03. IEEE International, Madison, WI, June 1-4, 2003, pp. 1924-1931.
23. Panda, D., T. A. Lipo, “A Half Power Rating Improved 3-Phase Six-Switch Boost Rectifier Using Two Half Controlled Configurations with a Common DC Bus,” Power Electronics Specialist Conference, 2003. PESC'03. IEEE 34th Annual Conference on, vol. 3, June 15-19, 2003, Acupulco, NM, pp. 1069-1074.

2004 Publications

1. Loh, P.C., D.G. Holmes, Y. Fukuta, T.A. Lipo, “A Reduced Common Mode Hysteresis Current Regulation Strategy for Multilevel Inverters,” IEEE Transactions on Power Electronics, Jan. 2004, vol. 19, iss. 1, pp. 192-200.
2. Stumberger, G., D.Zarko, M. T. Aydemir, T.A. Lipo, “Design of a Linear Bulk Superconductor Magnet Synchronous Motor for Electromagnetic Aircraft Launch Systems,” IEEE Transactions on Applied Superconductivity, Mar. 2004, vol. 14, iss. 1, pp. 54-62.
3. Tapia, J., Leonardi, F., T.A. Lipo, “3D Finite Elements Analysis and Experimental Validation for the Consequent Pole PM Machine,” IEEE International Magnetics Conference (INTERMAG), Anaheim, CA, Jan. 5-9, 2004.
4. Tenca, P., T.A. Lipo, “Synthesis of Desired AC Line Currents in Current-Sourced DC-AC Converters,” In Proc. of IEE Second International Conference on Power Electronics Machines and Drives (PEMD), University of Edinburgh, United Kingdon, Mar. 31-Apr. 2, 2004.
5. Welchko, B.A., T.M. Jahns, T.A. Lipo, “Short-Circuit Fault Mitigation Methods for Interior PM Synchronous Machine Drives using Six-Leg Inverters,” Proc. of the IEEE Power Electronics Specialists Conference, PESC'04, Aachen, Germany, June 20-25, 2004.
6. Lee, K., T.M. Jahns, W. E. Berkopec, T.A. Lipo, “Closed-Form Analysis of Adjustable Speed Drive Performance Under Input Voltage Unbalance and Sag Conditions,” Proc. of the IEEE Power Electronics Specialists Conference, PESC'04, Aachen, Germany, June 20-25, 2004, pp. 469-475, vol. 1. Industry Applications, IEEE Transactions on Volume: 42 Issue: 3 May-Jun 2006 Page(s): 733- 741
7. Tenca, P., T.A. Lipo, “Reduced Cost Current-Source Topology Improving the Harmonic Spectrum Through On-Line Functional Minimization,” Proc. of the IEEE Power Electronics Specialists Conference, PESC'04, Aachen, Germany, June 20-25, 2004.
8. Welchko, B., T.M. Jahns, T.A. Lipo, “Fault Interrupting Methods and Topologies for Interior PM Machine Drives,” EPE Power Electronics and Motion Control Conference, EPE-PEMC'04, Sept. 2004, Riga, Latvia.
9. Aydin, M., S. Huang, T.A. Lipo, “Axial Flux Permanent Magnet Disc Machines: A Review,” Symposium on Power Electronics, Electrical Drives, Automation, and Motion (SPEEDAM) 2004, Capri, Italy, June 16-18, 2004.
10. Welchko, B.A., J. Wai, T. M. Jahns, T. A. Lipo, “Magnet Flux Nulling Control of Interior PM Machine Drives for Improved Response to Short-Circuit Faults,” IEEE IAS Annual Meeting, IAS’04, October 3-7, 2004, Seattle, WA, USA, p. 261-267, vol. 1.

1. Lipo, T.A., M. Aydin, “Field Weakening of Permanent Magnet Machines – Design Approaches,” EPE Power Electronics and Motion Control Conference, EPE-PEMC'04, Sept. 2004, Riga, Latvia.
2. Wei, L., T.A. Lipo, “Investigation of the Dual Bridge Matrix Converter Operating Under Boost Mode,” EPE Power Electronics and Motion Control Conference, EPE-PEMC'04, Sept. 2004, Riga, Latvia.
3. Aydin M., J. Yao, E. Kayikci, S. Huang, and T. A. Lipo, “Design Considerations and Experimental Results of an Axial Flux PM Motor With Field Control,” ICEM, September 5-8, 2004, Cracow, Poland
4. Lipo, T.A., S.M. Madani, R. White, “Soft Magnetic Composites for AC Machines - A Fresh Perspective,” Power Electronics and Motion Control Conference, Sept. 2-4, 2004, Riga Latvia
5. Qu, R., T. A. Lipo, “Design and Parameter Effect Analysis of Dual-Rotor, Radial-Flux, Toroidally-Wound, Permanent-Magnet Machines,” IEEE Transactions on Industry Applications, Bol. 40, No. 3, May/June 2004, pp. 771-779
6. Qu, R., T. A. Lipo, “Sizing Equations and Power Density Evaluation of Dual-Rotor, Radial-Flux, Toroidally Wound, Permanent-Magnet Machines,” XVI International Conference on Electrical Machines, ICEM 200r, Cracow, Poland, Sept 2004.
7. Suh, Y., T.A. Lipo, “A Control Scheme in Hybrid Synchronous-Stationary Frame for PWM AC/DC Converter under Generalized Unbalanced Operating Conditions”, IEEE IAS Annual Meeting, IAS'04, 3-7 October, 2004, Seattle, WA, USA IEEE Transactions on Industry Applications May/June 2006

2005 Publications

1. Tenca, P, T. Lipo, “Conversion Topology for Reducing Failure Rate and Life-Cycle Costs of High-Power Wind Turbines,” 43rd Aerospace Sciences Meeting and Exhibit, 10-13 January 2005, Reno, Nevada.
2. Ouyang, W., T. A. Lipo, A. EL-Antably, “Analysis of Optimal Stator Concentric Winding Patterns Design,” IEMDC '05, 15-18 May, 2005, San Antonio, TX, USA.
3. Lee, K., T. M. Jahns, D. W. Novotny, T. A. Lipo, W. E. Berkopec, V. Blasko, “Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions,” IEEE 2005 International Electric Machines and Drives Conference, May 15-18 2005, San Antonio, TX, USA.
4. Madani, S. M., T. A. Lipo, C. E. Niño, D. Lugo, “Modeling of a Radial Permanent Magnet Motor with Trapezoidal Shaped Poles,” IEMDC 05, San Antonio, May 15 - 18, 2005.
5. Dufour, C., L. Wei, T. A. Lipo, “Real-Time Simulation of Matrix Converter Drives,” European Power Electronics Conference (EPE), Dresden, Germany, September 2005.
6. Lee, K., T. M. Jahns, T. A. Lipo, G. Venkataramanan, W. E Berkopek, “Impact of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives,” 2005 IEEE Industry Applications Society Annual Meeting, 2-6 October 2005, Hong Kong.
7. Panda, D., T. A. Lipo, “Double Side Control of Wound Rotor Induction Machine for Wind Energy Application Employing Half Controlled Converters,” 2005 IEEE Industry Applications Society Annual Meeting, 2-6 October 2005, Hong Kong
8. Ouyang, W., S. Huang, A. Good, T. A. Lipo, “ Modular Permanent Magnet Machine Based on Soft Magnetic Composite,” International Conference on Electrical Machines and Systems (ICEMS) 2005, September 27-29, 2005, Nanjing, China.
9. Shin, H. B., J. G. Park, S. K. Chung, H. W. Lee and T. A. Lipo, “Generalized Steady-state Analysis of Multiphase Interleaved Boost Converter with Coupled Inductors,” IEE Proc.-Electr. Power Appl., Vol. 152, No. 3, May 2005.
10. Bird, J., T. A. Lipo, “An Electrodynamic Wheel with a Split-Guideway Capable of Simultaneously Creating Suspension, Thrust and Guidance Forces,” 8^th International Symposium on Magnetic Suspension Technology, September 2005, Dresden Germany.
11. Bird, J., T. A. Lipo, “A Study of the Effect of Using Electrodynamic Wheels in Series,” 8^th International Symposium on Magnetic Suspension Technology, September 2005, Dresden Germany.
12. Tenca, P., T. A. Lipo, “A Cecentralized Protection Scheme for Converters Utilizing a DC-link Inductor” IECON Conference, 31st Annual Conference of the IEEE Industrial Electronics Society, Nov 6-10, 2005.

2006 Publications

1. Garcia, A.M., D.G. Holmes, T.A. Lipo. “Reduction of Bearing Currents in Doubly Fed Induction Generators.” 2006 IAS Annual Conference. Oct 8-12, 2006, Tampa, FL.
2. Tenca, P., A.A. Rockhill, T.A. Lipo. “Current-Source Topology for Wind Turbines Capable of Providing Leading Power Factor While Reducing Line Current Harmonics.” 2006 IAS Annual Conference. Oct 8-12, 2006, Tampa, FL. IEEE Transactions on Industry Applications.
3. W. Ouyang, D. Zarko, T.A. Lipo. “Permanent Magnet Machine Design Practice and Optimization.” 2006 IAS Annual Conference. Oct 8-12, 2006, Tampa, FL.

2007 Publications

1. Lipo, T.A., T. Komatsu, K. Shinohara. “Simulation of a Salient Pole Synchronous Machine with Both Field Pole and Stator Core Saturation.” Electromotion ‘07, Bordrum, Turkey, Sept. 10-12, 2007.
2. Lipo, T.A.. “Simulation of a High Temperature Superconducting Synchronous Machine with Stator Core Saturation.” AUPEC (Australasian Universities Power Engineering Conference) 2007. Perth, Australia. Dec . 10 - 12, 2007.
3. Tenca, P., A.A. Rockhill, T.A. Lipo. “Low Voltage Ride-Through Capability for Wind Turbines based on Current Source Inverter Topologies.” Seventh IEEE International Conference on Power Electronics and Drive Systems (IEEE PEDS 2007) November 27-30, 2007, Bangkok, Thailand.

top

2000 Publications

1. Luo, X., T.A. Lipo, “A Synchronous/Permanent Magnet Hybrid AC Machine,” IEEE Transactions on Energy Conversion, June 2000, vol. 15, no. 2, pp 203-210.

2. Sinha, G., T.A. Lipo, “A Four Level Inverter Based Drive With A Passive Front End,” IEEE Transactions on Power Electronics. Mar. 2000, vol. 15, no. 2, pp 285-294.

3. Kim, S., S.-K. Sul, T.A. Lipo, “AC to AC Power Conversion Based on Matrix Converter Topology with Unidirectional Switches,” IEEE Transactions on Industry Applications, Jan.-Feb. 2000, vol. 36, no. 1, pp. 139-145.

4. Munoz-Garcia, A., T.A. Lipo, “Dual Stator Winding Induction Machine Drive,” IEEE Transactions on Industry Applications, Sep-Oct 2000, vol. 36, no. 6, pp 1369-79.

5. Jiang, Q., T.A. Lipo, “Switching Angles and DC Link Voltages Optimization for Multilevel Cascade Inverters,” Electric-Machines-and-Power-Systems, July 2000, 28(7): 605-12.

6. Toba, A., T.A. Lipo, “Generic Torque-Maximizing Design Methodology of Permanent Magnet Vernier Machine,” IEEE Transactions on Industry Application, Nov.-Dec. 2000, vol. 36, no 6, pp 1539-46.

7. Luo, X., T.A. Lipo, “A Synchronous/Permanent Magnet Hybrid AC Machine,” IEEE Transaction on Energy Conversion, June 2000, vol. 15, iss. 2.

8. Lyra, R.O.C., B.J. Cardoso-Filho, V. John, T.A. Lipo, “Co-Axial Current Transformer for Test and Characterization of High Power Semiconductor Devices Under Hard and Soft-Switching,” IEEE Transactions on Industry Applications, July-Aug. 2000, vol.36, no.4, pp.1181-1188.

9. Manjrekar, M.D., P. Steimer, T.A. Lipo, “Hybrid Multilevel Power Conversion System: A Competitive Solution for High Power Applications,” IEEE Transactions on Industry Applications, May-June 2000, vol. 36, no 3, pp 834-841.

10. Osama, M., T.A. Lipo, “Experimental and Finite Element Analysis of an Electronic Pole-Change Drive,” IEEE Transactions on Industry Applications, Nov.-Dec. 2000, vol. 36, no 6, pp 1637-1644.

11. Kikuchi, J., M.D. Manjrekar, T.A. Lipo, “Complementary Half Controlled Three Phase PWM Boost Rectifier for Multi-DC-Link Applications,” APEC, New Orleans, LA, Feb. 2000, vol. 1, pp. 494-500.

12. Nedic, V., T.A. Lipo, “Experimental Verification of Induced Voltage Self-Excitation of a Switched Reluctance Generator,” IEEE/IAS Conference Record, Rome, Italy, Oct. 8-12, 2000, vol. 1, pp51-56.

13. Welchko, B.A., T.A. Lipo, “A Novel Variable Frequency Three Phase Induction Motor Drive System Using Only Three Controlled Switches,” IEEE/IAS Conference Record, Rome, Italy, Oct. 8-12, 2000, vol. 3, pp 1468-1473.

14. Benedict, E.R., T.A. Lipo, “Improved PWM Modulation for a Permanent-Split Capacitor Motor,” IEEE/IAS Conference Record, Rome, Italy, Oct. 8-12, 2000, vol.3, pp. 2004-2010.

15. Toba, A., H. Ohsawa, Y. Suzuki, T. Miura, T.A. Lipo, “Experimental Evaluations of the Dual-Excitation Permanent Magnet Vernier Machine,” IPEC Conference Record, Tokyo, Japan, Apr. 3-7, 2000, pp. 1884-1889.

16. Lipo, T.A., “An Improved Weighted Total Harmonic Distortion Index for Induction Motor Drives,” OPTIM, Brasov, Romania, 2000, vol. 2, pp 311-322.

17. Stankovic, A.V., T.A. Lipo, “A Novel Control Method for Input Output Harmonic Elimination of the PWM Boost Type Rectifier Under Unbalanced Operating Conditions,” APEC, New Orleans, LA, Feb. 2000, vol. 1, pp. 413-419.

18. Yamamoto, K., T.A. Lipo, K. Shinohara, Y. Sueyoshi, “Power Loss Reduction and Optimum Modulation Index of PWM Inverter with Voltage Booster for Permanent Magnet Synchronous Motor Drive,” IPEC Conference Record, Tokyo, Japan, Apr. 3-7, 2000, vol. 1, pp. 147-152.

19. Consoli, A., G. Scarcella, A. Testa, T.A. Lipo, “Air-Gap Flux Position Estimation of Inaccessible Neutral Induction Machines by Zero Sequence Voltage,” Conference Records for the Symposium on Power Electronics, Electric Machines, & Drives, Italy. July 2000, iss. B1, pp 1-6.

20. Woods, L., A. Homaifar, F. Fatehi, M. Chomat, T. Lipo, “Switching Transients of Low Cost Two Speed Drive for Single-Phase Induction Machine,” CPES Power Electronics Seminar, Blacksburg, VA, Sept. 17-19, 2000, pp 78-86.

21. Lipo, T.A., “Electric Machine Analysis and Simulation,” Wiley Encyclopedia of Electrical and Electronics Engineering, vol. 6, pp. 313-324.

22. McGrath, B.P., D.G. Holmes, M. Manjrekar, T.A. Lipo, “An Improved Modulation Strategy For a Hybrid Multilevel Inverter,” IEEE/IAS Conference Record, Rome, Italy, Oct. 8-12, 2000, vol. 4, pp. 2086-2093.

23. Huang, S., M. Aydin, T.A. Lipo, “Comparison of (Non-Slotted and Slotted) Surface Mounted PM Motors and Axial Flux Motors for Submarine Ship Drives,” 3rd Naval Symposium on Electrical Machines, 2000.

24. Kim, S., E. Benedict, F. Fatehi, , N. Patel, A. Homaifar, T.A Lipo, “Adjustable Speed Drive Control Based on Random Pulse Width Modulation,” CPES Annual Meeting, Apr. 2000, pp. 202-209.

25. Chomat, M., T.A. Lipo, “Two Switch Adjustable-Speed Drive with Single-Phase Induction Machine”, CPES Annual Meeting, Apr. 2000, pp. 381-385.

26. Alan, I., T.A. Lipo, “Starter/Generator Employing Resonant-Converter-fed Induction Machine, Part I: Analysis,” IEEE Transactions on Aerospace and Electronic Systems, Oct. 2000, vol. 36, no. 4, pp. 1309-1318.

27. Alan, I., T.A. Lipo, “Starter/Generator Employing Resonant-Converter-fed Induction Machine, Part II: Hardware Prototype”, IEEE Transactions on Aerospace and Electronic Systems, Oct. 2000, vol. 36, no. 4, pp. 1319-1329.

27. Lipo, T.A., “Converter Topologies for Induction Motor Drives,” Modern Electrical Drives 2000, pp. 273-288.